Adsorption

Adsorption is a process that occurs when a gas or liquid solute accumulates on the surface of a solid or a liquid (adsorbent), forming a molecular or atomic film (the adsorbate). It is different from absorption, in which a substance diffuses into a liquid or solid to form a solution. The term sorption encompasses both processes, while desorption is the reverse process.

Adsorption is indicative in most natural physical, biological, and chemical systems, and is widely used in industrial applications such as activated charcoal, synthetic resins and water purification. Adsorption, ion exchange and chromatography are sorption processes in which certain adsorptives are selectively transferred from the fluid phase to the surface of insoluble, rigid particles suspended in a vessel or packed in a column.

Similar to surface tension, adsorption is a consequence of surface energy. In a bulk material, all the bonding requirements (be they ionic, covalent or metallic) of the constituent atoms of the material are filled. But atoms on the (clean) surface experience a bond deficiency, because they are not wholly surrounded by other atoms. Thus it is energetically favourable for them to bond with whatever happens to be available. The exact nature of the bonding depends on the details of the species involved, but the adsorbed material is generally classified as exhibiting physisorption or chemisorption.

Adsorption isotherms

Adsorption is usually described through isotherms, that is, functions which connect the amount of adsorbate on the adsorbent, with its pressure (if gas) or concentration (if liquid).

The first isotherm is due to Freundlich and Küster (1894) and is a purely empirical formula valid for gaseous adsorbates,

Failed to parse (Missing texvc executable; please see math/README to configure.): \frac{x}{m}=kP^{\frac{1}{n}}

where Failed to parse (Missing texvc executable; please see math/README to configure.): x

is the adsorbed quantity, Failed to parse (Missing texvc executable; please see math/README to configure.): m
is the mass of adsorbent, Failed to parse (Missing texvc executable; please see math/README to configure.): P
is the pressure of adsorbate and Failed to parse (Missing texvc executable; please see math/README to configure.): k
and Failed to parse (Missing texvc executable; please see math/README to configure.): n
are empirical constants for each adsorbent-adsorbate pair at each temperature. The function has an asymptotic maximum. Therefore, as the temperature increases, the adsorbed quantity rises more slowly and more pressure is required to achieve the maximum.

Langmuir isotherm

See also: Langmuir equation

In 1916, Irving Langmuir published a new isotherm for gases adsorbed on solids, which retained his name. It is an empirical isotherm derived from a proposed kinetic mechanism. It is based on four hypotheses:

1. The surface of the adsorbent is uniform, that is, all the adsorption sites are equal.
2. Adsorbed molecules do not interact.
3. All adsorption occurs through the same mechanism.
4. At the maximum adsorption, only a monolayer is formed: molecules of adsorbate do not deposit on other, already adsorbed, molecules of adsorbate, only on the free surface of the adsorbent.

These four points are seldom true: there are always imperfections on the surface, adsorbed molecules are not necessarily inert, the mechanism is clearly not the same for the very first molecules as for the last to adsorb. The fourth condition is the most troublesome, as often more molecules can adsorb on the monolayer, but this problem is solved by the BET isotherm.

Langmuir suggests that adsorption takes place through this mechanism: A_(g) + S ⇌ AS, where A is a gas molecule and S is an adsorption site.

The direct and inverse rate constants are k and k_-1. If we define surface coverage, Failed to parse (Missing texvc executable; please see math/README to configure.): \theta , as the fraction of the adsorption sites occupied, in the equilibrium we have

Failed to parse (Missing texvc executable; please see math/README to configure.): K=\frac{k}{k_{-1}}=\frac{\theta}{(1-\theta)P}

or Failed to parse (Missing texvc executable; please see math/README to configure.): \theta=\frac{KP}{1+KP}.

For very low pressures Failed to parse (Missing texvc executable; please see math/README to configure.): \theta\approx KP

and for high pressures Failed to parse (Missing texvc executable; please see math/README to configure.): \theta\approx1

Failed to parse (Missing texvc executable; please see math/README to configure.): \theta

is difficult to measure experimentally; usually, the adsorbate is a gas and the adsorbed quantity is given at standard temperature and pressure (STP) volume per gram of adsorbent. Therefore, if we call vmon the STP volume of adsorbate required to form a monolayer on the adsorbent (per gram of adsorbent too), Failed to parse (Missing texvc executable; please see math/README to configure.): \theta = \frac{v}{v_\mathrm{mon}}
and we obtain an expression for a straight line:

Failed to parse (Missing texvc executable; please see math/README to configure.): \frac{1}{v}=\frac{1}{Kv_\mathrm{mon}}\frac{1}{P}+\frac{1}{v_\mathrm{mon}}.

Through its slope and y-intercept we can obtain v_mon and K, which are constants for each adsorbent/adsorbate pair at a given temperature. v_mon is related to the number of adsorption sites through the ideal gas law. If we assume that the number of sites is just the whole area of the solid divided into the cross section of the adsorbate molecules, we can easily calculate the surface area of the adsorbent. Surface area of adsorbents depends on their structure, the more pores they have, the greater the area, which has a big influence on reactions on surfaces.

If more than one gas adsorbs on the surface or inside, we call Failed to parse (Missing texvc executable; please see math/README to configure.): \theta_E

the fraction of empty sites and we have

Failed to parse (Missing texvc executable; please see math/README to configure.): \theta_E=\frac{1}{\displaystyle 1+\sum_{i=1}^n K_iP_i}

and

Failed to parse (Missing texvc executable; please see math/README to configure.): \theta_j=\frac{K_jP_j}{\displaystyle 1+\sum_{i=1}^n K_iP_i}

where i is each one of the gases that adsorb.

BET isotherm

Often molecules do form multilayers, that is, some are adsorbed on already adsorbed molecules and the Langmuir isotherm is not valid. In 1938 Stephan Brunauer, Paul Emmett and Edward Teller developed an isotherm that takes into account that possibility. The proposed mechanism is now:

A_(g) + S ⇌ AS

A_(g) + AS ⇌ A₂S

A_(g) + A₂S ⇌ A₃S and so on

The derivation of the formula is more complicated than Langmuir's (see links for complete derivation). We obtain:

Failed to parse (Missing texvc executable; please see math/README to configure.): \frac{x}{v(1-x)}=\frac{1}{v_\mathrm{mon}c}+\frac{x(c-1)}{v_\mathrm{mon}c}.

x is the pressure divided into the vapour pressure for the adsorbate at that temperature, v is the STP volume of adsorbed adsorbate, v_mon is the STP volume of the amount of adsorbate required to form a monolayer and c is the equilibrium constant K we used in Langmuir isotherm multiplied by the vapour pressure of the adsorbate. The biggest step in BET isotherm is to consider that the successive equilibria for all the layers except for the first are equal to the liquefaction of the adsorbate.

Langmuir isotherm is usually better for chemisorption and BET isotherm works better for physisorption.

Adsorption enthalpy

Adsorption constants are equilibrium constants, therefore they obey van 't Hoff's equation:

Failed to parse (Missing texvc executable; please see math/README to configure.): \left( \frac{\partial \ln K}{\partial \frac{1}{T}} \right)_\theta=-\frac{\Delta H}{R}.

As can be seen in the formula, the variation of K must be isosteric, that is, at constant coverage. If we start from BET isotherm and assume that the entropy change is the same for liquefaction and adsorption we obtain Failed to parse (Missing texvc executable; please see math/README to configure.): \Delta H_\mathrm{ads}=\Delta H_\mathrm{liq}-RT\ln c , that is to say, adsorption is more exothermic than liquefaction.

Adsorbents

Characteristics and general requirements

The adsorbents are used usually in the form of spherical pellets, rods, moldings or monoliths with hydrodynamic diameter between 0.5 and 10 mm. They must have high abrasion resistance, high thermal stability and small micropore diameter, which results in higher exposed surface area and hence high capacity of adsorption. The adsorbents must also have a distinct macropore structure which enables fast transport of the gaseous vapours.

Different types of industrial adsorbents generally fall into three classes:

• Oxygen-containing compounds – Are hydrophilic and polar, including materials such as silica gel and zeolites.
• Carbon-based compounds – Are hydrophobic and non-polar, including materials such as activated carbon.
• Polymer-based compounds - Are polar or non-polar functional groups in a porous polymer matrix.

Silica gel

Main article: silica gel

Silica gel is a chemically inert, nontoxic, polar and dimensionally stable (< 400 °C) amorphous form of SiO₂. It is prepared by the reaction between sodium silicate and sulphuric acid, which is followed by a series of after-treatment processes such as aging, pickling, etc. These after treatment methods results in various pore size distributions on its surface.

Silica is also used for drying of process air (e.g. oxygen, natural gas etc) and adsorption of higher (polar) hydrocarbons from natural gas.

Zeolites

Main article: zeolite

Zeolites are natural or synthetic aluminum silicates which form a regular crystal lattice and release water at high temperature. Zeolites are polar in nature.

They are manufactured by hydrothermal synthesis of sodium aluminosilicate in an autoclave followed by ion exchange with certain cations (Na+, Li+, Ca++, K+). The channel diameter of zeolite cages usually ranges from 2 to 9 Å (200 to 900 pm). This process is followed by drying of microcrystals, which are palletized with a binder, to form macropores and thermally activated at a temperature of 6500 °C.

Zeolites are applied in drying of process air (only traces), CO₂ removal from natural gas, CO removal from reforming gas and air separation.

Non-polar zeolites are synthesized by dealumination of polar zeolites. This is done by treating the zeolite with steam at elevated temperatures, greater than 500 °C (1000 °F). This high temperature heat treatment breaks the aluminum-oxygen bonds and the aluminum atom is expelled from the zeolite framework.

Non-polar zeolites are mostly used in non-polar organics removal.

Activated carbon

Main article: activated carbon

They are highly porous, amorphous solids consisting of microcrystallites with a graphite lattice. They are non-polar and cheap. One of their main drawbacks is that they are combustible.

Activated carbon can be manufactured from carbonaceous material, including coal (bituminous, subbituminous, and lignite), peat, wood, or nutshells (i.e., coconut). The manufacturing process consists of two phases, carbonization and activation. The carbonization process includes drying and then heating to separate by-products, including tars and other hydrocarbons, from the raw material, as well as to drive off any gases generated. The carbonization process is completed by heating the material at 400–600 °C in an oxygen-deficient atmosphere that cannot support combustion.

The carbonized particles are “activated” by exposing them to an oxidizing agent, usually steam or carbon dioxide at high temperature. This agent burns off the pore blocking structures created during the carbonization phase and so, they develop a porous, three-dimensional graphite lattice structure. The size of the pores developed during activation is a function of the time that they treated in this stage. Longer exposure times result in larger pore sizes. The most popular aqueous phase carbons are bituminous based because of their hardness, abrasion resistance, pore size distribution, and low cost, but their effectiveness needs to be tested in each application to determine the optimal product.

Activated carbon is used for adsorption of organic substances and non-polar adsorptives and it is also usually used for waste gas (and waste water) treatment. It is the most widely used adsorbent. Its usefulness derives mainly from its large micropore and mesopore volumes and the resulting high surface area.

Portal site mediated adsorption

Portal site mediated adsorption is a model for site-selective activated gas adsorption in metallic catalytic systems which contain a variety of different adsorption sites. In such systems, low-coordination "edge and corner" defect-like sites can exhibit significantly lower adsorption enthalpies than high-coordination (basal plane) sites. As a result, these sites can serve as "portals" for very rapid adsorption to the rest of the surface. The phenomena relies on the common "spillover" effect, where certain adsorbed species exhibit high mobility on some surfaces. The model explains seemingly inconsistent observations of gas adsorption thermodynamics and kinetics in catalytic systems where surfaces can exist in a range of coordination structures, and it has been successfully applied to bimetallic catalytic systems where synergistic activity is observed.

The original model was developed by King and co-workers (Narayan et al. 1998 and VanderWiel et al. 1999) to describe hydrogen adsorption on silica-supported silver-ruthenium and copper-ruthenium bimetallic catalysts. The same group applied the model to CO hydrogenation (Fischer-Tropsch synthesis). Zupanc et al. (2002) subsequently confirmed the same model on magnesia-supported cesium-ruthenium bimetallic catalysts.

Adsorption in viruses

Adsorption is the first step in the viral infection cycle. The next steps are penetration, uncoating, synthesis (transcription if needed, and translation), and release. The virus replication cycle is similar, if not the same, for all types of viruses. Factors such as transcription may or may not be needed if the virus is able to integrate its genomic information in the cell's nucleus, or if the virus can replicate itself directly within the cell's cytoplasm.

References

• Cussler, E.L. (1997). Diffusion: Mass Transfer in Fluid Systems, 2nd ed., pp.308-330.
• Narayan, R.L. and T.S. King (1998). 'Hydrogen adsorption states on silica-supported Ru-Ag and Ru-Cu bimetallic catalysts investigated via microcalorimetry', Thermochimica Acta, vol. 312, nos.1-2, pp.105-114.
• VanderWiel, D.P., M. Pruski and T.S. King (1999). 'A Kinetic Study of the Adsoprtion and Reaction of Hydrogen on Silica-Supported Ruthenium and Silver-Ruthenium Bimetallic Catalysts during the Hydrogenation of Carbon Monoxide', Journal of Catalysis, vol. 188, no. 1, pp.186-202.
• Zupanc, C., A. Hornung, O. Hinrichsen and M. Muhler (2002). 'The Interaction of Hydrogen with Ru/MgO Catalysts', Journal of Catalysis, vol. 209, pp. 501-514.

See also

• Langmuir equation
• BET theory
• Absorption
• Reactions on surfaces
• Freundlich equation
• Pressure Swing Adsorption
• Molecular Sieve

External links

• Derivation of Langmuir and BET isotherms
• Adsorption with activated carbonar:ادمصاص

bs:Adsorpcija bg:Адсорбция ca:Adsorció cs:Adsorpce da:Adsorption de:Adsorption et:Adsorptsioon es:Adsorción fr:Adsorption gl:Adsorción id:Adsorpsi it:Adsorbimento lt:Adsorbcija nl:Adsorptie ja:吸着 no:Adsorbsjon nn:Adsorpsjon pl:Adsorpcja pt:Adsorção ru:Адсорбция sk:Adsorpcia fi:Adsorptio sv:Adsorption tg:Адсорбсия uk:Адсорбція