Harvard architecture

Harvard architecture is a computer architecture with physically separate storage and signal pathways for instructions and data. The term originated from the Harvard Mark I relay-based computer, which stored instructions on punched tape (24 bits wide) and data in electro-mechanical counters (23 digits wide). These early machines had limited data storage, entirely contained within the data processing unit, and provided no access to the instruction storage as data, making loading and modifying programs an entirely offline process.

Memory details

In a Harvard architecture, there is no need to make the two memories share characteristics. In particular, the word width, timing, implementation technology, and memory address structure can differ. Instruction memory is often wider than data memory. In some systems, instructions can be stored in read-only memory while data memory generally requires read-write memory. In some systems, there is much more instruction memory than data memory so instruction addresses are much wider than data addresses.

Contrast with other computer architectures

In a computer with the contrasting von Neumann architecture (and no cache), the CPU can be either reading an instruction or reading/writing data from/to the memory. Both cannot occur at the same time since the instructions and data use the same bus system. In a computer using the Harvard architecture, the CPU can both read an instruction and perform a data memory access at the same time, even without a cache. A Harvard architecture computer can thus be faster for a given circuit complexity because instruction fetches and data access do not contend for a single memory pathway.

The Modified Harvard architecture is very much like the Harvard architecture but provides a pathway between the instruction memory and the CPU that allows words from the instruction memory to be treated as read-only data. This allows constant data, particularly text strings, to be accessed without first having to be copied into data memory, thus preserving more data memory for read/write variables. Special machine language instructions are provided to read data from the instruction memory. Most modern computers that are documented as Harvard Architecture are, in fact, Modified Harvard Architecture.

Speed

In recent years the speed of the CPU has grown many times in comparison to the access speed of the main memory. Care needs to be taken to reduce the number of times main memory is accessed in order to maintain performance. If, for instance, every instruction run in the CPU requires an access to memory, the computer gains nothing for increased CPU speed — a problem referred to as being memory bound.

It is possible to make extremely fast memory but this is only practical for small amounts of memory for both cost and signal routing reasons. The solution is to provide a small amount of very fast memory known as a CPU cache which holds recently accessed data. As long as the memory that the CPU needs is in the cache, the performance hit is much smaller than it is when the cache has to turn around and get the data from the main memory. Cache tuning is an important aspect of computer design.

Modern high performance CPU chip designs incorporate aspects of both Harvard and von Neumann architecture. On-chip cache memory is divided into an instruction cache and a data cache. Harvard architecture is used as the CPU accesses the cache. In the case of a cache miss, however, the data is retrieved from the main memory, which is not divided into separate instruction and data sections. Thus, while a von Neumann architecture is presented to the programmer, the hardware implementation gains the efficiencies of the Harvard architecture.

Uses

Harvard architectures are also frequently used in:

• Specialized digital signal processors, DSPs, commonly used in audio or video processing products. For example, Blackfin processors by Analog Devices, Inc. use a Harvard architecture.
• Most general purpose small microcontrollers used in many electronics applications, such as the PIC by Microchip Technology, Inc., and AVR by Atmel Corp. These processors are characterized by having small amounts of program and data memory, and take advantage of the Harvard architecture and reduced instruction sets (RISC) to ensure that most instructions can be executed within only one machine cycle, which is not necessarily one clock cycle. The separate storage means the program and data memories can have different bit depths. Example: PICs have an 8-bit data word but (depending on specific range of PICs) a 12-, 14-, or 16-bit program word. This allows a single instruction to contain a full-size data constant. Other RISC architectures, for example the ARM, typically must use at least two instructions to load a full-size constant.

See also

• Von Neumann architecture
• Modified Harvard architecture

cs:Harvardská architektura

de:Harvard-Architektur es:Arquitectura Harvard fr:Architecture Harvard ko:하버드 아키텍처 hr:Harvardska arhitektura it:Architettura Harvard nl:Harvard-architectuur ja:ハーバード・アーキテクチャ pl:Architektura harwardzka pt:Arquitetura Harvard ru:Гарвардская архитектура sr:Харвардска архитектура vi:Kiến trúc Harvard uk:Гарвардська архітектура