Injection molding

Injection molding ( British variant spelling: moulding) is a manufacturing technique for making parts from both thermoplastic and thermosetting plastic materials in production. Molten plastic is injected at high pressure into a mold (British variant spelling: mould), which is the inverse of the product's shape. After a product is designed by an Industrial Designer or an Engineer, molds are made by a moldmaker (or toolmaker) from metal, usually either steel or aluminium, and precision-machined to form the features of the desired part. Injection molding is widely used for manufacturing a variety of parts, from the smallest component to entire body panels of cars. Injection molding is the most common method of production, with some commonly made items including bottle caps and outdoor furniture. Injection molding typically is capable of an IT Grade of about 9-14.

Materials: The most commonly used thermoplastic materials are polystyrene (low cost, lacking the strength and longevity of other materials), ABS or acrylonitrile butadiene styrene (a ter-polymer or mixture of compounds used for everything from Lego parts to electronics housings), polyamide (chemically resistant, heat resistant, tough and flexible - used for combs), polypropylene (tough and flexible - used for containers), polyethylene, and polyvinyl chloride or PVC (more common in extrusions as used for pipes, window frames, or as the insulation on wiring where it is rendered flexible by the inclusion of a high proportion of plasticiser).

Injection molding can also be used to manufacture parts from aluminium or brass. The melting points of these metals are much higher than those of plastics; this makes for substantially shorter mold lifetimes despite the use of specialized steels. Nonetheless, the costs compare quite favorably to sand casting, particularly for smaller parts.

Equipment

Main article: Injection molding machine

Injection molding machines, also known as presses, hold the molds in which the components are shaped. Presses are rated by tonnage, which expresses the amount of clamping force that the machine can generate. This pressure keeps the mold closed during the injection process. Tonnage can vary from less than 5 tons to 6000 tons, with the higher figures used in comparatively few manufacturing operations.

Mold

Mold (Tool and/or Mold) is the common term used to describe the production tooling used to produce plastic parts in molding.

Traditionally, molds have been expensive to manufacture. They were usually only used in mass production where thousands of parts were being produced. Molds are typically constructed from hardened steel, pre-hardened steel, aluminium, and/or beryllium-copper alloy. The choice of material to build a mold is primarily one of economics. Steel molds generally cost more to construct, but their longer lifespan will offset the higher initial cost over a higher number of parts made before wearing out. Pre-hardened steel molds are less wear resistant and are used for lower volume requirements or larger components. The steel hardness is typically 38-45 on the Rockwell-C scale. Hardened steel molds are heat treated after machining. These are by far the superior in terms of wear resistance and lifespan. Typical hardness ranges between 50 and 60 Rockwell-C (HRC). Aluminium molds can cost substantially less, and when designed and machined with modern computerized equipment, can be economical for molding tens or even hundreds of thousands of parts. Beryllium copper is used in areas of the mold which require fast heat removal or areas that see the most shear heat generated.

Design

Molds separate into two sides at a parting line, the A side, and the B side, to permit the part to be extracted. Plastic resin enters the mold through a sprue in the A plate, branches out between the two sides through channels called runners, and enters each part cavity through one or more specialized gates. Inside each cavity, the resin flows around protrusions (called cores) and conforms to the cavity geometry to form the desired part. The amount of resin required to fill the sprue, runner and cavities of a mold is a shot. When a core shuts off against an opposing mold cavity or core, a hole results in the part. Air in the cavities when the mold closes escapes through very slight gaps beteen the plates and pins, into shallow plenums called vents. To permit removal of the part, its features must not overhang one another in the direction that the mold opens, unless parts of the mold are designed to move from between such overhangs when the mold opens. Sides of the part that appear parallel with the direction of draw (the direction in which the core and cavity separate from each other) are typically angled slightly with (draft) to ease release of the part from the mold, and examination of most plastic household objects will reveal this. Parts with bucket-like features tend to shrink onto the cores that form them while cooling, and cling to those cores when the cavity is pulled away. The mold is usually designed so that the molded part reliably remains on the ejector (B) side of the mold when it opens, and draws the runner and the sprue out of the (A) side along with the parts. The part then falls freely when ejected from the (B) side. Tunnel gates tunnel sharply below the parting surface of the B side at the tip of each runner so that the gate is sheared off of the part when both are ejected. Ejector pins are the most popular method for removing the part from the B side core(s), but air ejection, and stripper plates can also be used depending on the application. Most ejector plates are found on the moving half of the tool, but they can be placed on the fixed half if spring loaded. For thermoplastics, coolant, usually water with corrosion inhibitors, circulates through passageways bored through the main plates on both sides of the mold to enable temperature control and rapid part solidification.

To ease maintenance and venting, cavities and cores are divided into pieces, called inserts, and subassemblies, also called inserts, blocks, or chase blocks. By substituting interchangeable inserts, one mold may make several variations of the same part.

More complex parts are formed using more complex molds. These may have sections called slides, that move into a cavity perpendicular to the draw direction, to form overhanging part features. Slides are then withdrawn to allow the part to be released when the mold opens. Slides are typically guided and retained between rails called gibs, and are moved when the mold opens and closes by angled rods called horn pins and locked in place by locking blocks, both of which move cross the mold from the opposite side.

Some molds allow previously molded parts to be reinserted to allow a new plastic layer to form around the first part. This is often referred to as overmolding. This system can allow for production of one-piece tires and wheels.

2-shot or multi shot molds are designed to "overmold" within a single molding cycle and must be processed on specialized injection molding machines with two or more injection units. This can be achieved by having pairs of identical cores and pairs of different cavities within the mold. After injection of the first material, the component is rotated on the core from the one cavity to another. The second cavity differs from the first in that the detail for the second material is included. The second material is then injected into the additional cavity detail before the completed part is ejected from the mold. Common applications include "soft-grip" toothbrushes and freelander grab handles.

The core and cavity, along with injection and cooling hoses form the mold tool. While large tools are very heavy (up to 60t), they can be hoisted into molding machines for production and removed when molding is complete or the tool needs repairing.

A mold can produce several copies of the same parts in a single "shot". The number of "impressions" in the mold of that part is referred to as cavitation. A tool with one impression will often be called a single cavity (impression) tool. A mold with 2 or more cavities of the same parts will likely be referred to as multiple cavity tooling. Some extremely high production volume molds (like those for bottle caps) can have over 128 cavities.

In some cases multiple cavity tooling will mold a series of different parts in the same tool. Some toolmakers call these molds family molds as all the parts are not the same but often part of a family of parts (to be used in the same product for example).

Machining

Cost

The cost of manufacturing molds depends on a very large set of factors ranging from number of cavities, size of the parts (and therefore the mold), complexity of the pieces, expected tool longevity, surface finishes and many others.

Injection process

Injection Molding Cycle

The basic injection cycle is as follows: Mold close - injection carriage forward - inject plastic - metering - carriage retract - mold open - eject part(s) Some machines are run by electric motors instead of hydraulics or a combination of both. The water-cooling channels that assist in cooling the mold and the heated plastic solidifies into the part. Improper cooling can result in distorted molding or one that is burnt. The cycle is completed when the mold opens and the part is ejected with the assistance of ejector pins within the mold.

The resin, or raw material for injection molding, is usually in pellet or granule form, and is melted by heat and shearing forces shortly before being injected into the mold. Resin pellets are poured into the feed hopper, a large open bottomed container, which feeds the granules down to the screw. The screw is rotated by a motor, feeding pellets up the screw's grooves. The depth of the screw flights decreases towards the end of the screw nearest the mold, compressing the heated plastic. As the screw rotates, the pellets are moved forward in the screw and they undergo extreme pressure and friction which generates most of the heat needed to melt the pellets. Heaters on either side of the screw assist in the heating and temperature control during the melting process.

The channels through which the plastic flows toward the chamber will also solidify, forming an attached frame. This frame is composed of the sprue, which is the main channel from the reservoir of molten resin, parallel with the direction of draw, and runners, which are perpendicular to the direction of draw, and are used to convey molten resin to the gate(s), or point(s) of injection. The sprue and runner system can be cut or twisted off and recycled, sometimes being granulated next to the mold machine. Some molds are designed so that the part is automatically stripped through action of the mold.

Molding trial

When filling a new or unfamiliar mold for the first time, where shot size for that mold is unknown, a technician/tool setter usually starts with a small shot weight and fills gradually until the mold is 95 to 99% full. Once this is achieved a small amount of holding pressure will be applied and holding time increased until gate freeze off has occurred, then holding pressure is increased until the parts are free of sinks and part weight has been achieved. Once the parts are good enough and have passed any specific criteria, a setting sheet is produced for people to follow in the future.

Process optimization is done using the following methods. Injection speeds are usually determined by performing viscosity curves. Process windows are performed varying the melt temperatures and holding pressures. Pressure drop studies are done to check if the machine has enough pressure to move the screw at the set rate. Gate seal or gate freeze studies are done to optimize the holding time. A cooling time study is done to optimize the cooling time.

Molding defects

Injection molding is a complex technology with possible production problems. They can either be caused by defects in the molds or more often by part processing (molding)

History

In 1868 John Wesley Hyatt became the first to inject hot celluloid into a mold, producing billiard balls. He and his brother Isaiah patented an injection molding machine that used a plunger in 1872, and the process remained more or less the same until 1946, when James Hendry^{[citation needed]} built the first screw injection molding machine, revolutionizing the plastics industry. Roughly 95% of all molding machines now use screws to efficiently heat, mix, and inject plastic into molds....

See also

• Reaction Injection Molding, a similar technique to standard injection molding, enables the use of thermoset polymers to produce large and complex parts.
• http://www.formphysics.com/ Form Physics is your first choice for economical, precision-made components in a large variety of metal compositions. Industries typically supplied are communications, electronics, medical and dental orthodontics.
• http://metalinjectionmoldingonline.com/ For adddtional information on Metal Injection Molding see the resource site Metal Injection Molding Online dot Com.
• American Mold Builders Association
• Protek Medical*[1]
• A History of Plastics
• European Committee of Machinery Manufacturers for the Plastics and Rubber Industries (EUROMAP) – Technical recommendations
• Injection molding machine states
• Injection molding know how and formulas
• Injection molding problems and solutions
• Injection Molding Machine Supplier Directory
• Global thermoplastic and thermoset resin manufacturers
• Injection molded part cost estimator in Java
• Injection molding cycle & process description
• IRC in Polymer Science and Technology, University of Bradford, UK
• List of thermoplastics and thermoset materials, showing definitions, properties and applications.
• Injection Moulding Workflow
• Injection Molding Part Cost Estimator
• Molding 101
• Injection Molding Process Optimization
• Plastics Design Guide[[Category:

da:Sprøjtestøbning de:Spritzgießen es:Moldeo por inyección fr:Moulage par injection it:Stampaggio ad iniezione hu:Fröccsöntés nl:Spuitgieten ja:射出成形 pl:Formowanie wtryskowe fi:Ruiskuvalukone vi:Máy ép nhựa tr:Plastik enjeksiyon