Nuclear fusion

In physics and nuclear chemistry, nuclear fusion is the process by which multiple atomic particles join together to form a heavier nucleus. It is accompanied by the release or absorption of energy. Iron and nickel nuclei have the largest binding energies per nucleon of all nuclei and therefore are the most stable. The fusion of two nuclei lighter than iron or nickel generally releases energy while the fusion of nuclei heavier than iron or nickel absorbs energy; vice-versa for the reverse process, nuclear fission.

Nuclear fusion occurs naturally in stars. Artificial fusion in human enterprises has also been achieved, although not yet completely controlled. Building upon the nuclear transmutation experiments of Ernest Rutherford done a few years earlier, fusion of light nuclei (hydrogen isotopes) was first observed by Mark Oliphant in 1932, and the steps of the main cycle of nuclear fusion in stars were subsequently worked out by Hans Bethe throughout the remainder of that decade. Research into fusion for military purposes began in the early 1940s, as part of the Manhattan Project, but was not successful until 1952. Research into controlled fusion for civilian purposes began in the 1950s, and continues to this day.

Overview

Nuclear physics

Radioactive decay Nuclear fission Nuclear fusion Classical decays Alpha decay · Beta decay · Gamma radiation · Cluster decay Advanced decays Double beta decay · Double electron capture · Internal conversion · Isomeric transition Emission processes Neutron emission · Positron emission · Proton emission Capturing Electron capture · Neutron capture R · S · P · Rp Fission Spontaneous fission · Spallation · Cosmic ray spallation · Photodisintegration Nucleosynthesis Stellar Nucleosynthesis Big Bang nucleosynthesis Supernova nucleosynthesis Scientists Henri Becquerel · Marie Curie · Pierre Curie · Hans Bethe · others

This box: view • talk • edit

Fusion reactions power the stars and produce all but the lightest elements in a process called nucleosynthesis. Whereas the fusion of light elements in the stars releases energy, production of the heaviest elements absorbs energy.

When the fusion reaction is a sustained uncontrolled chain, it can result in a thermonuclear explosion, such as that generated by a hydrogen bomb. Reactions which are not self-sustaining can still release considerable energy, as well as large numbers of neutrons.

Research into controlled fusion, with the aim of producing fusion power for the production of electricity, has been conducted for over 50 years. It has been accompanied by extreme scientific and technological difficulties, and as of yet has not been successful in producing workable designs. As of the present, the only self-sustaining fusion reactions produced by humans have been produced in hydrogen bombs, where the extreme power of a fission bomb is necessary to begin the process. While some plans have been put forth to attempt to use the explosions of hydrogen bombs to generate electricity (e.g. PACER), none of these have ever moved far past the design stage.

It takes considerable energy to force nuclei to fuse, even those of the lightest element, hydrogen. This is because all nuclei have a positive charge (due to their protons), and as like charges repel, nuclei strongly resist being put too close together. Accelerated to high speeds (that is, heated to thermonuclear temperatures), however, they can overcome this electromagnetic repulsion and get close enough for the attractive nuclear force to be stronger, achieving fusion. The fusion of lighter nuclei, creating a heavier nucleus and a free neutron, will generally release more energy than it took to force them together-an exothermic process that can produce self-sustaining reactions.

The energy released in most nuclear reactions is much larger than that in chemical reactions, because the binding energy that holds a nucleus together is far greater than the energy that holds electrons to a nucleus. For example, the ionization energy gained by adding an electron to a hydrogen nucleus is 13.6 electron volts - less than one-millionth of the 17 MeV released in the D-T (deuterium-tritium) reaction shown to the top right. Fusion reactions have an energy density many times greater than nuclear fission-that is, per unit of mass the reactions produce far greater energies, even though individual fission reactions are generally much more energetic than individual fusion reactions-which are themselves millions of times more energetic than chemical reactions. Only the direct conversion of mass into energy, such as with collision of matter and antimatter, is more energetic per unit of mass than nuclear fusion.

Requirements

A substantial energy barrier must be overcome before fusion can occur. At large distances two naked nuclei repel one another because of the repulsive electrostatic force between their positively charged protons. If two nuclei can be brought close enough together, however, the electrostatic repulsion can be overcome by the attractive nuclear force which is stronger at close distances.

When a nucleon such as a proton or neutron is added to a nucleus, the nuclear force attracts it to other nucleons, but primarily to its immediate neighbors due to the short range of the force. The nucleons in the interior of a nucleus have more neighboring nucleons than those on the surface. Since smaller nuclei have a larger surface area-to-volume ratio, the binding energy per nucleon due to the strong force generally increases with the size of the nucleus but approaches a limiting value corresponding to that of a fully surrounded nucleon.

The electrostatic force, on the other hand, is an inverse-square force, so a proton added to a nucleus will feel an electrostatic repulsion from all the other protons in the nucleus. The electrostatic energy per nucleon due to the electrostatic force thus increases without limit as nuclei get larger.

The net result of these opposing forces is that the binding energy per nucleon generally increases with increasing size, up to the elements iron and nickel, and then decreases for heavier nuclei. Eventually, the binding energy becomes negative and very heavy nuclei are not stable. The four most tightly bound nuclei, in decreasing order of binding energy, are ⁶²Ni, ⁵⁸Fe, ⁵⁶Fe, and ⁶⁰Ni.^[1] Even though the nickel isotope ,⁶²Ni, is more stable, the iron isotope ⁵⁶Fe is an order of magnitude more common. This is due to a greater disintegration rate for ⁶²Ni in the interior of stars driven by photon absorption.

A notable exception to this general trend is the helium-4 nucleus, whose binding energy is higher than that of lithium, the next heavier element. The Pauli exclusion principle provides an explanation for this exceptional behavior — it says that because protons and neutrons are fermions, they cannot exist in exactly the same state. Each proton or neutron energy state in a nucleus can accommodate both a spin up particle and a spin down particle. Helium-4 has an anomalously large binding energy because its nucleus consists of two protons and two neutrons; so all four of its nucleons can be in the ground state. Any additional nucleons would have to go into higher energy states.

The situation is similar if two nuclei are brought together. As they approach each other, all the protons in one nucleus repel all the protons in the other. Not until the two nuclei actually come in contact can the strong nuclear force take over. Consequently, even when the final energy state is lower, there is a large energy barrier that must first be overcome. It is called the Coulomb barrier.

The Coulomb barrier is smallest for isotopes of hydrogen—they contain only a single positive charge in the nucleus. A bi-proton is not stable, so neutrons must also be involved, ideally in such a way that a helium nucleus, with its extremely tight binding, is one of the products.

Using deuterium-tritium fuel, the resulting energy barrier is about 0.01 MeV. In comparison, the energy needed to remove an electron from hydrogen is 13.6 eV,^{[citation needed]} about 750 times less energy. The (intermediate) result of the fusion is an unstable ⁵He nucleus, which immediately ejects a neutron with 14.1 MeV.^{[citation needed]} The recoil energy of the remaining ⁴He nucleus is 3.5 MeV,^{[citation needed]} so the total energy liberated is 17.6 MeV.^{[citation needed]} This is many times more than what was needed to overcome the energy barrier.

If the energy to initiate the reaction comes from accelerating one of the nuclei, the process is called beam-target fusion; if both nuclei are accelerated, it is beam-beam fusion. If the nuclei are part of a plasma near thermal equilibrium, one speaks of thermonuclear fusion. Temperature is a measure of the average kinetic energy of particles, so by heating the nuclei they will gain energy and eventually have enough to overcome this 0.01 MeV. Converting the units between electronvolts and kelvins shows that the barrier would be overcome at a temperature in excess of 120 million kelvins, obviously a very high temperature.

There are two effects that lower the actual temperature needed. One is the fact that temperature is the average kinetic energy, implying that some nuclei at this temperature would actually have much higher energy than 0.01 MeV, while others would be much lower. It is the nuclei in the high-energy tail of the velocity distribution that account for most of the fusion reactions. The other effect is quantum tunneling. The nuclei do not actually have to have enough energy to overcome the Coulomb barrier completely. If they have nearly enough energy, they can tunnel through the remaining barrier. For this reason fuel at lower temperatures will still undergo fusion events, at a lower rate.

The reaction cross section σ is a measure of the probability of a fusion reaction as a function of the relative velocity of the two reactant nuclei. If the reactants have a distribution of velocities, e.g. a thermal distribution with thermonuclear fusion, then it is useful to perform an average over the distributions of the product of cross section and velocity. The reaction rate (fusions per volume per time) is <σv> times the product of the reactant number densities:

Failed to parse (Missing texvc executable; please see math/README to configure.): f = n_1 n_2 \langle \sigma v \rangle

If a species of nuclei is reacting with itself, such as the DD reaction, then the product Failed to parse (Missing texvc executable; please see math/README to configure.): n_1n_2

must be replaced by Failed to parse (Missing texvc executable; please see math/README to configure.): (1/2)n^2

.

Failed to parse (Missing texvc executable; please see math/README to configure.): \langle \sigma v \rangle

increases from virtually zero at room temperatures up to meaningful magnitudes at temperatures of 10 – 100 keV. At these temperatures, well above typical ionization energies (13.6 eV in the hydrogen case), the fusion reactants exist in a plasma state.

The significance of <σv> as a function of temperature in a device with a particular energy confinement time is found by considering the Lawson criterion.

Fuel confinement methods

Gravitational

One force capable of confining the fuel well enough to satisfy the Lawson criterion is gravity. The mass needed, however, is so great that gravitational confinement is only found in stars (the smallest of which are brown dwarfs). Even if the more reactive fuel deuterium were used, a mass greater than that of the planet Jupiter would be needed.

Magnetic

See Magnetic fusion energy for more information.

The charged ions of fusion fuel follow spiral orbits around magnetic field lines (see Guiding center#Gyration), and the fuel is therefore trapped along the field lines. A variety of magnetic configurations exist, including the toroidal geometries of tokamaks and stellarators and open ended mirror confinement systems.

Inertial

See Inertial fusion energy for more information.

A third confinement principle is to apply a rapid pulse of energy to a large part of the surface of a pellet of fusion fuel, causing it to simultaneously "implode" and heat to very high pressure and temperature. If the fuel is dense enough and hot enough, the fusion reaction rate will be high enough to burn a significant fraction of the fuel before it has dissipated. To achieve these extreme conditions, the initially cold fuel must be explosively compressed. Inertial confinement is used in the hydrogen bomb, where the driver is x-rays created by a fission bomb. Inertial confinement is also attempted in "controlled" nuclear fusion, where the driver is a laser, ion, or electron beam, or a Z-pinch.

Some other confinement principles have been investigated, such as muon-catalyzed fusion, the Farnsworth-Hirsch fusor and Polywell (inertial electrostatic confinement), and bubble fusion.

Production methods

A variety of methods are known to affect nuclear fusion. Some are "cold" in the strict sense that no part of the material is hot (except for the reaction products), some are "cold" in the limited sense that the bulk of the material is at a relatively low temperature and pressure but the reactants are not, and some are "hot" fusion methods that create macroscopic regions of very high temperature and pressure.

Locally cold fusion

• Muon-catalyzed fusion is a well-established and reproducible fusion process that occurs at ordinary temperatures. It was studied in detail by Steven Jones in the early 1980s. It has not been reported to produce net energy. Net energy production from this reaction is not believed to be possible because of the energy required to create muons, their 2.2 µs half-life, and the chance that a muon will bind to the new alpha particle and thus stop catalyzing fusion.

• "Cold fusion" also refers to a simple method using electrodes (generally palladium,) in heavy water, which has not been verified to be possible.

Generally cold, locally hot fusion

• Accelerator based light-ion fusion. Using particle accelerators it is possible to achieve particle kinetic energies sufficient to induce many light ion fusion reactions. Of particular relevance into this discussion are devices referred to as sealed-tube neutron generators. These small devices are miniature particle accelerators filled with deuterium and tritium gas in an arrangement which allows ions of these nuclei to be accelerated against hydride targets, also containing deuterium and tritium, where fusion takes place. Hundreds of neutron generators are produced annually for use in the petroleum industry where they are used in measurement equipment for locating and mapping oil reserves. Despite periodic reports in the popular press by scientists claiming to have invented "table-top" fusion machines, neutron generators have been around for half a century. The sizes of these devices vary but the smallest instruments are often packaged in sizes smaller than a loaf of bread. These devices do not produce a net power output.

• In sonoluminescence, acoustic shock waves create temporary bubbles that collapse shortly after creation, producing very high temperatures and pressures. In 2002, Rusi P. Taleyarkhan reported the possibility that bubble fusion occurs in those collapsing bubbles (aka sonofusion). As of 2005, experiments to determine whether fusion is occurring give conflicting results. If fusion is occurring, it is because the local temperature and pressure are sufficiently high to produce hot fusion.^[2] In an episode of Horizon, on BBC television, it was conclusively shown that, although temperatures were reached which could initiate fusion on a large scale, no fusion was occurring, and inaccuracies in the measuring system were the cause of anomalous results.
  • The Farnsworth-Hirsch Fusor is a tabletop device in which fusion occurs. This fusion comes from high effective temperatures produced by electrostatic acceleration of ions. The device can be built inexpensively, but it too is unable to produce a net power output.
  • Antimatter-initialized fusion uses small amounts of antimatter to trigger a tiny fusion explosion. This has been studied primarily in the context of making nuclear pulse propulsion feasible. This is not near becoming a practical power source, due to the cost of manufacturing antimatter alone.
  • Pyroelectric fusion was reported in April 2005 by a team at UCLA. The scientists used a pyroelectric crystal heated from −34 to 7°C (−30 to 45°F), combined with a tungsten needle to produce an electric field of about 25 gigavolts per meter to ionize and accelerate deuterium nuclei into an erbium deuteride target. Though the energy of the deuterium ions generated by the crystal has not been directly measured, the authors used 100 keV (a temperature of about 10⁹ K) as an estimate in their modeling.^[3] At these energy levels, two deuterium nuclei can fuse together to produce a helium-3 nucleus, a 2.45 MeV neutron and bremsstrahlung. Although it makes a useful neutron generator, the apparatus is not intended for power generation since it requires far more energy than it produces.^[4][5][6][7]

    Hot fusion

    In "standard" "hot" fusion, the fuel reaches tremendous temperature and pressure inside a fusion reactor or nuclear weapon.

    The methods in the second group are examples of non-equilibrium systems, in which very high temperatures and pressures are produced in a relatively small region adjacent to material of much lower temperature. In his doctoral thesis for MIT, Todd Rider did a theoretical study of all quasineutral, isotropic, non-equilibrium fusion systems. He demonstrated that all such systems will leak energy at a rapid rate due to bremsstrahlung radiation produced when electrons in the plasma hit other electrons or ions at a cooler temperature and suddenly decelerate. The problem is not as pronounced in a hot plasma because the range of temperatures, and thus the magnitude of the deceleration, is much lower. Note that Rider's work does not apply to non-neutral and/or anisotropic non-equilibrium plasmas.

    Important reactions

    Astrophysical reaction chains

    

    

    The proton-proton chain dominates in stars the size of the Sun or smaller.
    

    

    The CNO cycle dominates in stars heavier than the Sun.

    The most important fusion process in nature is that which powers the stars. The net result is the fusion of four protons into one alpha particle, with the release of two positrons, two neutrinos (which changes two of the protons into neutrons), and energy, but several individual reactions are involved, depending on the mass of the star. For stars the size of the sun or smaller, the proton-proton chain dominates. In heavier stars, the CNO cycle is more important. Both types of processes are responsible for the creation of new elements as part of stellar nucleosynthesis.

    At the temperatures and densities in stellar cores the rates of fusion reactions are notoriously slow. For example, at solar core temperature (T ≈ 15 MK) and density (120 g/cm³), the energy release rate is only 276 mW/cm³—about a quarter of the volumetric rate at which a resting human body generates heat. ^[8] Thus, reproduction of stellar core conditions in a lab for nuclear fusion power production is completely impractical. Because nuclear reaction rates strongly depend on temperature (exp(−E/kT)), then in order to achieve reasonable rates of energy production in terrestrial fusion reactors 10–100 times higher temperatures (compared to stellar interiors) are required T ≈ 0.1–1.0 GK.

    Criteria and candidates for terrestrial reactions

    In man-made fusion, the primary fuel is not constrained to be protons and higher temperatures can be used, so reactions with larger cross-sections are chosen. This implies a lower Lawson criterion, and therefore less startup effort. Another concern is the production of neutrons, which activate the reactor structure radiologically, but also have the advantages of allowing volumetric extraction of the fusion energy and tritium breeding. Reactions that release no neutrons are referred to as aneutronic.

    In order to be useful as a source of energy, a fusion reaction must satisfy several criteria. It must

    • be exothermic: This may be obvious, but it limits the reactants to the low Z (number of protons) side of the curve of binding energy. It also makes helium He-4 the most common product because of its extraordinarily tight binding, although He-3 and H-3 also show up;
    • involve low Z nuclei: This is because the electrostatic repulsion must be overcome before the nuclei are close enough to fuse;
    • have two reactants: At anything less than stellar densities, three body collisions are too improbable. It should be noted that in inertial confinement, both stellar densities and temperatures are exceeded to compensate for the shortcomings of the third parameter of the Lawson criterion, ICF's very short confinement time;
    • have two or more products: This allows simultaneous conservation of energy and momentum without relying on the electromagnetic force;
    • conserve both protons and neutrons: The cross sections for the weak interaction are too small.

    Few reactions meet these criteria. The following are those with the largest cross sections:

    (1)

    21D

    +

    31T

    →

    42He

    (

    3.5 MeV

    )

    +

    n0

    (

    14.1 MeV

    )

    (2i)

    21D

    +

    21D

    →

    31T

    (

    1.01 MeV

    )

    +

    p+

    (

    3.02 MeV

    )

    50%

    (2ii)

    →

    32He

    (

    0.82 MeV

    )

    +

    n0

    (

    2.45 MeV

    )

    50%

    (3)

    21D

    +

    32He

    →

    42He

    (

    3.6 MeV

    )

    +

    p+

    (

    14.7 MeV

    )

    (4)

    31T

    +

    31T

    →

    42He

    +

    2 n0

    +

    11.3 MeV

    (5)

    32He

    +

    32He

    →

    42He

    +

    2 p+

    +

    12.9 MeV

    (6i)

    32He

    +

    31T

    →

    42He

    +

    p+

    +

    n0

    +

    12.1 MeV

    51%

    (6ii)

    →

    42He

    (

    4.8 MeV

    )

    +

    21D

    (

    9.5 MeV

    )

    43%

    (6iii)

    →

    42He

    (

    0.5 MeV

    )

    +

    n0

    (

    1.9 MeV

    )

    +

    p+

    (

    11.9 MeV

    )

    6%

    (7i)

    21D

    +

    63Li

    →

    2 42He

    +

    22.4 MeV

    (7ii)

    →

    32He

    +

    42He

    +

    n0

    +

    2.56 MeV

    (7iii)

    →

    73Li

    +

    p+

    +

    5.0 MeV

    (7iv)

    →

    74Be

    +

    n0

    +

    3.4 MeV

    (8)

    p+

    +

    63Li

    →

    42He

    (

    1.7 MeV

    )

    +

    32He

    (

    2.3 MeV

    )

    (9)

    32He

    +

    63Li

    →

    2 42He

    +

    p+

    +

    16.9 MeV

    (10)

    p+

    +

    115B

    →

    3 42He

    +

    8.7 MeV

    Nucleosynthesis

    Stellar nucleosynthesis Big Bang nucleosynthesis Supernova nucleosynthesis Cosmic ray spallation

    Related topics

    Astrophysics Nuclear fusion R-process S-process Nuclear fission

    edit

    
    

    For reactions with two products, the energy is divided between them in inverse proportion to their masses, as shown. In most reactions with three products, the distribution of energy varies. For reactions that can result in more than one set of products, the branching ratios are given.

    Some reaction candidates can be eliminated at once.^[9] The D-⁶Li reaction has no advantage compared to p⁺-¹¹₅B because it is roughly as difficult to burn but produces substantially more neutrons through ²₁D-²₁D side reactions. There is also a p⁺-⁷₃Li reaction, but the cross section is far too low, except possibly when T_i > 1 MeV, but at such high temperatures an endothermic, direct neutron-producing reaction also becomes very significant. Finally there is also a p⁺-⁹₄Be reaction, which is not only difficult to burn, but ⁹₄Be can be easily induced to split into two alpha particles and a neutron.

    In addition to the fusion reactions, the following reactions with neutrons are important in order to "breed" tritium in "dry" fusion bombs and some proposed fusion reactors:

    n0	+	63Li	→	31T	+	42He
    n0	+	73Li	→	31T	+	42He	+	n0

    To evaluate the usefulness of these reactions, in addition to the reactants, the products, and the energy released, one needs to know something about the cross section. Any given fusion device will have a maximum plasma pressure that it can sustain, and an economical device will always operate near this maximum. Given this pressure, the largest fusion output is obtained when the temperature is chosen so that <σv>/T² is a maximum. This is also the temperature at which the value of the triple product nTτ required for ignition is a minimum, since that required value is inversely proportional to <σv>/T² (see Lawson criterion). (A plasma is "ignited" if the fusion reactions produce enough power to maintain the temperature without external heating.) This optimum temperature and the value of <σv>/T² at that temperature is given for a few of these reactions in the following table.

    fuel	T [keV]	<σv>/T² [m³/s/keV²]
    21D-31T	13.6	1.24×10-24
    21D-21D	15	1.28×10-26
    21D-32He	58	2.24×10-26
    p+-63Li	66	1.46×10-27
    p+-115B	123	3.01×10-27

    Note that many of the reactions form chains. For instance, a reactor fueled with ³₁T and ³₂He will create some ²₁D, which is then possible to use in the ²₁D-³₂He reaction if the energies are "right". An elegant idea is to combine the reactions (8) and (9). The ³₂He from reaction (8) can react with ⁶₃Li in reaction (9) before completely thermalizing. This produces an energetic proton which in turn undergoes reaction (8) before thermalizing. A detailed analysis shows that this idea will not really work well, but it is a good example of a case where the usual assumption of a Maxwellian plasma is not appropriate.

    Neutronicity, confinement requirement, and power density

    Image:IvyMike2.jpg

    The only fusion reactions thus far produced by humans to achieve ignition are those which have been created in hydrogen bombs; the first of which, Ivy Mike, is shown here.

    Any of the reactions above can in principle be the basis of fusion power production. In addition to the temperature and cross section discussed above, we must consider the total energy of the fusion products E_fus, the energy of the charged fusion products E_ch, and the atomic number Z of the non-hydrogenic reactant.

    Specification of the ²₁D-²₁D reaction entails some difficulties, though. To begin with, one must average over the two branches (2) and (3). More difficult is to decide how to treat the ³₁T and ³₂He products. ³₁T burns so well in a deuterium plasma that it is almost impossible to extract from the plasma. The ²₁D-³₂He reaction is optimized at a much higher temperature, so the burnup at the optimum ²₁D-²₁D temperature may be low, so it seems reasonable to assume the ³₁T but not the ³₂He gets burned up and adds its energy to the net reaction. Thus we will count the ²₁D-²₁D fusion energy as E_fus = (4.03+17.6+3.27)/2 = 12.5 MeV and the energy in charged particles as E_ch = (4.03+3.5+0.82)/2 = 4.2 MeV.

    Another unique aspect of the ²₁D-²₁D reaction is that there is only one reactant, which must be taken into account when calculating the reaction rate.

    With this choice, we tabulate parameters for four of the most important reactions.

    fuel	Z	Efus [MeV]	Ech [MeV]	neutronicity
    21D-31T	1	17.6	3.5	0.80
    21D-21D	1	12.5	4.2	0.66
    21D-32He	2	18.3	18.3	~0.05
    p+-115B	5	8.7	8.7	~0.001

    The last column is the neutronicity of the reaction, the fraction of the fusion energy released as neutrons. This is an important indicator of the magnitude of the problems associated with neutrons like radiation damage, biological shielding, remote handling, and safety. For the first two reactions it is calculated as (E_fus-E_ch)/E_fus. For the last two reactions, where this calculation would give zero, the values quoted are rough estimates based on side reactions that produce neutrons in a plasma in thermal equilibrium.

    Of course, the reactants should also be mixed in the optimal proportions. This is the case when each reactant ion plus its associated electrons accounts for half the pressure. Assuming that the total pressure is fixed, this means that density of the non-hydrogenic ion is smaller than that of the hydrogenic ion by a factor 2/(Z+1). Therefore the rate for these reactions is reduced by the same factor, on top of any differences in the values of <σv>/T². On the other hand, because the ²₁D-²₁D reaction has only one reactant, the rate is twice as high as if the fuel were divided between two hydrogenic species.

    Thus there is a "penalty" of (2/(Z+1)) for non-hydrogenic fuels arising from the fact that they require more electrons, which take up pressure without participating in the fusion reaction. (It is usually a good assumption that the electron temperature will be nearly equal to the ion temperature. Some authors, however discuss the possibility that the electrons could be maintained substantially colder than the ions. In such a case, known as a "hot ion mode", the "penalty" would not apply.) There is at the same time a "bonus" of a factor 2 for ²₁D-²₁D due to the fact that each ion can react with any of the other ions, not just a fraction of them.

    We can now compare these reactions in the following table.

    fuel	<σv>/T²	penalty/bonus	reactivity	Lawson criterion	power density
    21D-31T	1.24×10-24	1	1	1	1
    21D-21D	1.28×10-26	2	48	30	68
    21D-32He	2.24×10-26	2/3	83	16	80
    p+-115B	3.01×10-27	1/3	1240	500	2500

    The maximum value of <σv>/T² is taken from a previous table. The "penalty/bonus" factor is that related to a non-hydrogenic reactant or a single-species reaction. The values in the column "reactivity" are found by dividing 1.24×10^-24 by the product of the second and third columns. It indicates the factor by which the other reactions occur more slowly than the ²₁D-³₁T reaction under comparable conditions. The column "Lawson criterion" weights these results with E_ch and gives an indication of how much more difficult it is to achieve ignition with these reactions, relative to the difficulty for the ²₁D-³₁T reaction. The last column is labeled "power density" and weights the practical reactivity with E_fus. It indicates how much lower the fusion power density of the other reactions is compared to the ²₁D-³₁T reaction and can be considered a measure of the economic potential.

    Bremsstrahlung losses in quasineutral, isotropic plasmas

    The ions undergoing fusion in many systems will essentially never occur alone but will be mixed with electrons that in aggregate neutralize the ions' bulk electrical charge and form a plasma. The electrons will generally have a temperature comparable to or greater than that of the ions, so they will collide with the ions and emit x-ray radiation of 10-30 keV energy (Bremsstrahlung). The Sun and stars are opaque to x-rays, but essentially any terrestrial fusion reactor will be optically thin for x-rays of this energy range. X-rays are difficult to reflect but they are effectively absorbed (and converted into heat) in less than mm thickness of stainless steel (which is part of a reactor's shield). The ratio of fusion power produced to x-ray radiation lost to walls is an important figure of merit. This ratio is generally maximized at a much higher temperature than that which maximizes the power density (see the previous subsection). The following table shows the rough optimum temperature and the power ratio at that temperature for several reactions.^[10]

    fuel	Ti (keV)	Pfusion/PBremsstrahlung
    21D-31T	50	140
    21D-21D	500	2.9
    21D-32He	100	5.3
    32He-32He	1000	0.72
    p+-63Li	800	0.21
    p+-115B	300	0.57

    The actual ratios of fusion to Bremsstrahlung power will likely be significantly lower for several reasons. For one, the calculation assumes that the energy of the fusion products is transmitted completely to the fuel ions, which then lose energy to the electrons by collisions, which in turn lose energy by Bremsstrahlung. However because the fusion products move much faster than the fuel ions, they will give up a significant fraction of their energy directly to the electrons. Secondly, the plasma is assumed to be composed purely of fuel ions. In practice, there will be a significant proportion of impurity ions, which will lower the ratio. In particular, the fusion products themselves must remain in the plasma until they have given up their energy, and will remain some time after that in any proposed confinement scheme. Finally, all channels of energy loss other than Bremsstrahlung have been neglected. The last two factors are related. On theoretical and experimental grounds, particle and energy confinement seem to be closely related. In a confinement scheme that does a good job of retaining energy, fusion products will build up. If the fusion products are efficiently ejected, then energy confinement will be poor, too.

    The temperatures maximizing the fusion power compared to the Bremsstrahlung are in every case higher than the temperature that maximizes the power density and minimizes the required value of the fusion triple product. This will not change the optimum operating point for ²₁D-³₁T very much because the Bremsstrahlung fraction is low, but it will push the other fuels into regimes where the power density relative to ²₁D-³₁T is even lower and the required confinement even more difficult to achieve. For ²₁D-²₁D and ²₁D-³₂He, Bremsstrahlung losses will be a serious, possibly prohibitive problem. For ³₂He-³₂He, p⁺-⁶₃Li and p⁺-¹¹₅B the Bremsstrahlung losses appear to make a fusion reactor using these fuels with a quasineutral, anisotropic plasma impossible. Some ways out of this dilemma are considered — and rejected — in Fundamental limitations on plasma fusion systems not in thermodynamic equilibrium by Todd Rider.^[11] This limitation does not apply to non-neutral and anisotropic plasmas; however, these have their own challenges to contend with.

    See also

    Physics Portal

    Image:Crystal 128 energy.png

    Energy Portal

    • Fusion power
    • Nucleosynthesis
    • Helium fusion
    • Helium-3
    • Neutron source
    • Neutron generator
    • Timeline of nuclear fusion
    • Periodic table

    References

    1. ^ The Most Tightly Bound Nuclei
    2. ^ Access : Desktop fusion is back on the table : Nature News
    3. ^ http://www.nature.com/nature/journal/v434/n7037/extref/nature03575-s1.pdf
    4. ^ UCLA Crystal Fusion
    5. ^ Physics News Update 729
    6. ^ Coming in out of the cold: nuclear fusion, for real | csmonitor.com
    7. ^ Nuclear fusion on the desktop ... really! - Science - MSNBC.com
    8. ^ FusEdWeb | Fusion Education
    9. ^ http://theses.mit.edu/Dienst/UI/2.0/Page/0018.mit.theses/1995-130/30?npages=306
    10. ^ http://theses.mit.edu/Dienst/UI/2.0/Page/0018.mit.theses/1995-130/26?npages=306
    11. ^ http://fusion.ps.uci.edu/artan/Posters/aps_poster_2.pdf Portable Document Format (PDF)

    
    

    External links

    • International Fusion Research and Prototype reactor
    • IEC Fusion Video Presentation – Presentation on inertial electrostatic confinement fusion from Dr. Robert Bussard
    • Fusion.org.uk – A guide to fusion from the UKAEA
    • Fusion Power Associates A Washington, DC area lobbying organization; "a non-profit, tax-exempt research and educational foundation, providing timely information on the status of fusion development." Edits the Journal of Fusion Energy.
    • Fusion Science and Technology– Journal published by the American Nuclear Society.
    • Impulse Devices A small California based company researching table top sonic bubble fusion.
    • MIT Article on table top fusion
    • JET– Nuclear Fusion Research at the Joint European Torus
    • Nuclear Files.org What is Nuclear Fusion?
    • Nuclear Fusion Animation
    • Nuclear Fusion Explained
    • Chaos could keep fusion under control
    • Nuclear fusion reactions First chapter of The Physics of Inertial Fusion, Stefano Atzeni and Jürgen Meyer-ter-Vehn
    • Nuclear Fusion for Beginners

    v • d • e Fusion power
    Core topics	Nuclear fusion (Timeline) · Nuclear power · Nuclear reactor · Atomic nucleus · Fusion energy gain factor · Lawson criterion · Magnetohydrodynamics · Neutron flux · Plasma

    v • d • e Nuclear fusion methods
    Magnetic confinement	Tokamak · Spheromak · Stellarator · Reversed field pinch · Field-Reversed Configuration · Levitated Dipole · Riggatron
    Inertial confinement	Laser-driven · Z-pinch · Bubble fusion (acoustic) · Fusor (electrostatic) · Magnetized target
    Other forms	Muon-catalyzed · Pyroelectric · Migma · Polywell · Dense plasma focus

    v • d • e Fusion experiments by confinement method
    Magnetic	International ITER Asia/Australia EAST (China) · JT-60 and the Large Helical Device (Japan) · KSTAR (South Korea) · H-1NF (Australia) Europe JET · Tore Supra (France) · ASDEX Upgrade and Wendelstein 7-X (Germany) · T-15 (Russia) · TCV (Switzerland) · MAST and START (UK) USA DIII-D · TFTR · NSTX · NCSX · UCLA ET · Alcator C-Mod · LDX Commercial DEMO
    Inertial	Laser Asia GEKKO XII (Japan) Europe HiPER · Asterix IV (Czech Republic) · LMJ and Luli2000 (France) · ISKRA (Russia) · Vulcan (UK) USA NIF · OMEGA · Nova · Novette · Nike · Shiva · Argus · Cyclops · Janus · Long path · 4 pi Non-laser USA Z machine · PACER
    International Fusion Materials Irradiation Facility

    v • d • e Nuclear technology
    Engineering	Nuclear physics · Nuclear fission · Nuclear fusion · Radiation · Ionizing radiation · Atomic nucleus · Nuclear safety · Nuclear chemistry
    Material	Nuclear fuel · Fertile material · Thorium · Uranium (enriched • depleted) · Plutonium · Deuterium · Tritium
    Power	Core topics Reactor technology · Radioactive waste · Fusion power · Energy development · Nuclear propulsion (Nuclear thermal rocket) · Radioisotope thermoelectric generator Reactor types Inertial fusion · Pressurized water (PWR) · Boiling water (BWR) · Generation IV Fast breeder (FBR) · Fast neutron (FNR) · Magnox · Advanced gas-cooled (AGR) · Gas-cooled fast (GFR) · Molten salt (MSR) · Liquid-metal-cooled (LMFR) · Lead-cooled fast (LFR) · Sodium-cooled fast (SFR) · Supercritical water (SCWR) · Very high temperature (VHTR) · Pebble bed · Integral Fast (IFR) · SSTAR
    Medicine	Imaging Positron emission tomography (PET) · Single photon emission computed tomography (SPECT) · Gamma (Anger) camera Therapies Radiation therapy · Tomotherapy · Proton therapy · Brachytherapy · Boron Neutron Capture Therapy (BNCT)
    Weapons	History · Design · Nuclear warfare · Nuclear arms race · Nuclear explosion (effects) · Testing · Delivery · Proliferation List of states with nuclear weapons · List of nuclear tests

    zh-min-nan:Hu̍t-chú iông-ha̍p bs:Fuzija bg:Термоядрен синтез cs:Termonukleární reakce da:Fusion de:Kernfusion el:Πυρηνική σύντηξη es:Fusión nuclear eo:Fuzio fa:همجوشی هسته‌ای fr:Fusion nucléaire ko:핵융합 hr:Fuzija id:Fusi nuklir it:Fusione nucleare he:היתוך גרעיני lt:Branduolių sąlaja hu:Magfúzió ml:അണുസംയോജനം nl:Kernfusie ja:原子核融合 no:Kjernefysisk fusjon pl:Reakcja termojądrowa pt:Fusão nuclear ru:Термоядерная реакция simple:Nuclear fusion sk:Jadrová syntéza sl:Jedrsko zlivanje sr:Nuklearna fuzija fi:Fuusioreaktio sv:Fusion vi:Phản ứng tổng hợp hạt nhân tr:Füzyon uk:Ядерний синтез zh-yue:原子核融合