Solar power satellite

It has been suggested that this article or section be merged with Space solar power . (Discuss)

Error creating thumbnail: convert: unable to open image `/home/www/en.wikilib.com/images/8/84/Suntower.jpg': 没有那个文件或目录. convert: missing an image filename `/home/www/en.wikilib.com/images/thumb/8/84/Suntower.jpg/250px-Suntower.jpg'.

An artist's depiction of a solar satellite, which could send energy wirelessly to a space vessel or planetary surface.

A solar power satellite, or SPS or Powersat, as originally proposed would be a satellite built in high Earth orbit that uses microwave power transmission to beam solar power to a very large antenna on Earth. Advantages of placing the solar collectors in space include the unobstructed view of the Sun, unaffected by the day/night cycle, weather, or seasons^[1]. It is a renewable energy source, zero emission, and only generates waste as a product of manufacture and maintenance. However, the costs of construction are very high, and SPS will not be able to compete with conventional sources (at current energy prices) unless at least one of the following conditions is met:^{[citation needed]}

• Low launch costs can be achieved^{[citation needed]}
• A space-based manufacturing industry develops that is capable of building solar power satellites in orbit, using off-Earth materials^{[citation needed]}

In common with other types of renewable energy such a system could have advantages to the world in terms of energy security via reduction in levels of conflict, military spending, loss of life, and avoiding future conflict over dwindling energy sources.

History

The SPS concept was first described in November 1968 ^[2]. At first it was regarded as impractical due to the lack of a workable method of sending power collected down to the Earth's surface. This changed in 1973 when Peter Glaser was granted U.S. patent number 3,781,647 ^[3] for his method of transmitting power over long distances (eg, from an SPS to the Earth's surface) using microwaves from a, perhaps square kilometer, antenna on the satellite to a much larger one on the ground, which came to be known as a rectenna.[1]

Glaser then worked at Arthur D. Little, Inc., as a vice-president. NASA became interested and signed a contract with ADL to lead four other companies in a broader study in 1974. They found that, while the concept had several major problems -- chiefly the expense of putting the required materials in orbit and the lack of experience on projects of this scale in space, it showed enough promise to merit further investigation and research ^[1].

During the period from 1978 - 1981 the US Congress authorized DOE and NASA to jointly investigate. They organized the Satellite Power System Concept Development and Evaluation Program ^[4][5]. The study remains the most extensive performed to date. Several reports were published addressing various issues, together investigating most of the possible problems with such an engineering project. They include:

• Resource Requirements (Critical Materials, Energy, and Land)^[6]
  • Financial/Management Scenarios^[7][8]
    • Public Acceptance^[9]
      • State and Local Regulations as Applied to Satellite Power System Microwave Receiving Antenna Facilities^[10]
        • Student Participation^[11]
          • Potential of Laser for SPS Power Transmission^[12]
            • International Agreements^[13][14]
              • Centralization/Decentralization^[15]
                • Mapping of Exclusion Areas For Rectenna Sites^[16]
                  • Economic and Demographic Issues Related to Deployment^[17]
                    • Some Questions and Answers^[18]
                      • Meteorological Effects on Laser Beam Propagation and Direct Solar Pumped Lasers^[19]
                        • Public Outreach Experiment^[20]
                          • Power Transmission and Reception Technical Summary and Assessment ^[21]
                            • Space Transportation^[22]
                              • Office of Technology Assessment^[23]

                                After these studies were published, there was no follow up work and the concept dwindled. The DOE study conclusions were critical of the project's possibilities. Confusing press reports widely reported that the concept had been demonstrated to be infeasible ^[24].

                                More recently, the SPS concept has again become interesting, due to increased energy demand, increased costs, and emission implications, and starting in 1997 with the NASA "Fresh Look"^[25] however funding is still minimal.

                                In 2007, the US Department of Defense expressed interest in the concept^[26].

                                At some cost point, the high initial costs of an SPS project will become favourable due to the low-cost delivery of power. By some estimates, this has already happened in some locations, as a result of the widely varying costs of electricity which sometimes approach (or even exceed) this point. In addition, continued advances in material science and space transport continue to whittle away at the startup cost of an SPS.^[27]

                                Image:Solardisk.jpg

                                The SPS essentially consists of three parts:

                                1. a solar collector, typically made up of solar cells
                                2. a microwave antenna on the satellite, aimed at Earth
                                3. one or more paired, and much larger, antennas (rectennas) on the Earth's surface

                                Spacecraft design

                                In many ways, the SPS is a simpler conceptual design than most power generation systems previously proposed. The simple aspects include the physical structure required to hold the SPS together and to align it orthogonally to the Sun. This will be considerably lighter than any similar structure on Earth since it will be in a zero-g, vacuum environment and will not need to support itself against a gravity field and needs no protection from terrestrial wind or weather.

                                Solar photons will be converted to electricity aboard the SPS spacecraft, and that electricity will be fed to an array of Klystron tubes which will generate the microwave beam.

                                Solar energy conversion (solar photons to DC current)

                                Two basic methods of converting photons to electricity have been studied, solar dynamic (SD) and photovoltaic (PV).

                                SD uses a heat engine to drive a piston or a turbine which connects to a generator or dynamo. Two heat cycles for solar dynamic are thought to be reasonable for this: the Brayton cycle or the Stirling cycle. Terrestrial solar dynamic systems typically use a large reflector to focus sunlight to a high concentration to achieve a high temperature so the heat engine can operate at high thermodynamic efficiencies; an SPS implementation is expected to be similar. ^[28] A major advantage of space solar is the efficiency with which huge mirrors can be supported and pointed in zero gravity and vacuum conditions of space. They can be constructed with very thin aluminum or other metal sheets and very light frames, easily constructed from materials available in space.

                                PV uses semiconductor cells (e.g., silicon or gallium arsenide) to directly convert sunlight photons into voltage via a quantum mechanical mechanism. These are commonly known as “solar cells”, and will likely be rather different from the glass panel protected solar cell panels familiar to many and in current terrestrial use. They will, for reasons of weight, probably be built in membrane form, not suitable to terrestrial use which is subject to considerable gravitational loading.

                                It is also possible to use Concentrating Photovoltaic (CPV) systems, which like SD are a form of Concentrating Solar Energy that convert concentrated light into electricity by PV rather than heat engines. They also use tracking systems, mirrors, and lenses to achieve high concentration ratios and are able to reach efficiencies above 40% Concentrating Photovoltaic Technology. Because their PV area is much smaller, the majority of the area of CPV systems is mirrors, as with SD systems; so they share the advantages of building and pointing large mirror arrays in space versus the Earth's surface.

                                Comparison of PV, CPV, and SD

                                The main problems with non-concentrating PV are that PV cells continue to be relatively expensive, and require a relatively large area to be acceptable. In addition, semiconductor PV panels will require a relatively large amount of energy to produce; amorphous-silicon designs require much less energy to produce but are less efficient. CPV designs with a small area of 40%+ efficient cells and large reflector area can be built with relatively small amounts of energy. Unfortunately, the materials for high-efficiency photovoltaics, like gallium and arsenic, are much less common than silicon in lunar materials.

                                SD is a more mature technology, having been in widespread use in many contexts for centuries. Both CPV and SD systems have much more severe pointing requirements than PV, because most proposed designs require accurate and stable optical focus. If a PV array drifts off a few degrees, the power being produced will drop a few percent. But, if an SD or CPV array drifts off a few degrees, the power produced will drop off very quickly to zero, or near to it. Aiming reflector arrays requires much less energy in space, without terrestrial wind and gravitation loads, but it has its own problems of gyroscopic action, vibration, limits on reaction mass, solar wind, and meteorite strikes on control mechanisms.

                                Currently, PV cells weigh between 0.5kg/kW^[29] and 10kg/kW depending on design. SD designs also vary but most seem to be heavier per kW produced than PV cells and thus this pushes up launch costs. CPV should be lighter; since it replaces the thermal power plant (except for the radiator for waste heat) with a much lighter PV array.

                                Lifetime

                                The lifetime of a PV based SPS is limited mainly by the ionizing radiation from the radiation belts and the Sun. Without some method of protection, this is likely to cause the cells to continuously degrade by about a percent or two per year. Deterioration is likely to be more rapid during periods of high exposure to energetic protons from solar particle events^[30]. If some practical protection can be designed, this also might be reducible.

                                Lifetimes for SD based SPS designs will be limited by structural and mechanical considerations, such as micrometeorite impact, metal fatigue of turbine blades, wear of sliding surfaces (although this might be avoidable by hydrostatic bearings or magnetic bearings), degradation or loss of lubricants and working fluids in vacuum, from loss of structural integrity leading to impaired optical focus amongst components, and from temperature extreme effects. As well, most mirror surfaces will degrade from both radiation^{[citation needed]} and particle impact, but such mirrors can be designed simply (and so light and cheap), so replacement may be practical.

                                In either case, another advantage of the SPS design is that waste heat developed at collection points is re-radiated back into space, instead of warming the adjacent local biosphere as with conventional sources; thus thermal efficiency will not be in itself an important design parameter except insofar as it affects the power/weight ratio via operational efficiency and hence pushes up launch costs. (For example SD may require larger radiators when operating at a lower efficiency). Earth based power handling systems must always be carefully designed, for both economic and purely engineering reasons, with operational thermal efficiency in mind.

                                One useful 'trick' SPS has up it's sleeve is that at the end of life, the material does not need to be launched a second time. In theory it would be possible to recycle the satellite 'on-site', potentially at a significantly lower cost than launching an SPS from new. This might allow a very expensive launch cost to be paid for over multiple satellite lifetimes.

                                Energy payback

                                Clearly for a system (including manufacture, launch and deployment) to provide net power it must repay the energy needed to construct it. For current silicon PV panels the energy needs are relatively high, and typically several years of deployment in a terrestrial environment is needed to recover this energy.^{[31][32][31][33]} With SPS net energy received on the ground is higher (more or less necessarily so, for the system to be worth deploying), so this energy payback period would be somewhat reduced; however SD, being made of conventional materials, are more similar to conventional powerstations and are likely to be less energy intensive and would be expected to give quicker energy break even, depending on construction technology.

                                Wireless power transmission to the Earth

                                Wireless power transmission was early proposed to transfer energy from collection to the Earth's surface. The power could be transmitted as either microwave or laser radiation at a variety of frequencies depending on system design. Whatever choice is made, the transmitting radiation would have to be non-ionizing to avoid potential disturbances either ecologically or biologically if it is to reach the Earth's surface. This established an upper bound for the frequency used, as energy per photon, and so the ability to cause ionization, increases with frequency. Ionization of biological materials doesn't begin until ultraviolet or higher frequencies so most radio frequencies will be acceptable for this.

                                William C. Brown demonstrated in 1964 on CBS news with Walter Cronkite, a microwave-powered model helicopter that received all the power needed for flight from a microwave beam. Between 1969 and 1975 Bill Brown was technical director of a JPL Raytheon program that beamed 30 kW over a distance of 1 mile at 84% efficiency.

                                To minimize the sizes of the antennas used, the wavelength should be small (and frequency correspondingly high) since antenna efficiency increases as antenna size increases. More precisely, both for the transmitting and receiving antennas, the angular beam width is inversely proportional to the aperture of the antenna, measured in units of the transmission wavelength. The highest frequencies that can be used are limited by water vapor and CO2 absorption of air at higher microwave frequencies.

                                For these reasons, 2.45 GHz has been proposed as being a reasonable compromise. However, that frequency results in large antenna sizes at the GEO distance. A loitering stratospheric airship has been proposed to receive higher frequencies (or even laser beams), converting them to something like 2.45 GHz for retransmission to the ground. The proposal has not been as carefully evaluated for engineering plausibility as other aspects of SPS design.

                                Spacecraft sizing

                                The sizing will be dominated by the distance from Earth to geostationary orbit (22,300 miles, 35,700 km), the chosen wavelength of the microwaves, and the laws of physics, specifically the Rayleigh Criterion or Diffraction limit, used in standard RF (Radio Frequency) antenna design.

                                For best efficiency, the satellite antenna should be circular and about 1 kilometers in diameter or larger; the ground antenna (rectenna) should be elliptical, 10km wide, and a length that makes the rectenna appear circular from GSO. (Typically 14km at USA latitude.) Smaller antennas would result in increased losses to diffraction/sidelobes. For the desired (23mW/cm²) microwave intensity ^[34] these antennas could transfer between 5 and 10 gigawatts of power. To be most cost effective, the system needs to operate at maximum capacity. And, to collect and convert that much power, the satellite would need between 50 and 100 square kilometers of collector area (if readily available ~14% efficient monocrystalline silicon solar cells were deployed). State of the art (currently, quite expensive, triple junction gallium arsenide) solar cells with a maximum efficiency of 40.7% ^[35] could reduce the necessary collector area by two thirds, but would not necessarily give overall lower costs. In either cases, the SPS's structure would be kilometers wide, making it larger than most man-made structures here on Earth. While almost certainly not beyond current engineering capabilities, building structures of this size in orbit has not yet been attempted.

                                LEO/MEO instead of GEO

                                A LEO system of space power stations has been proposed as a precursor to GEO space power beaming system(s)^[36]. There would be advantages, (much shorter path length allowing smaller antenna sizes, lower cost to orbit) and disadvantages (constantly changing antenna geometries, increased debris collision difficulties, etc). It might be possible to deploy LEO systems sooner than GEO because the antenna development would take less time. Ultimately, because full engineering feasibility studies have not been conducted, it is not known whether this would be an improvement over a GEO installation.

                                Earth based infrastructure

                                The Earth-based receiver antenna (or rectenna) is a critical part of the original SPS concept. It would probably consist of many short dipole antennas, connected via diodes. Microwaves broadcast from the SPS will be received in the dipoles with about 85% efficiency^[37]. With a conventional microwave antenna, the reception efficiency is still better, but the cost and complexity is also considerably greater, almost certainly prohibitively so. Rectennas would be multiple kilometers across. Crops and farm animals may be raised underneath a rectenna, as the thin wires used for support and for the dipoles will only slightly reduce sunlight, so such a rectenna would not be as expensive in terms of land use as might be supposed.

                                Advantages of an SPS

                                The SPS concept is attractive because space has several major advantages over the Earth's surface for the collection of solar power. There is no air in space, so the collecting surfaces would receive much more intense sunlight, unaffected by weather. In geostationary orbit, an SPS would be illuminated over 99% of the time. The SPS would be in Earth's shadow on only a few days at the spring and fall equinoxes; and even then for a maximum of 75 minutes late at night^[38] when power demands are at their lowest^{[citation needed]}. This allows the power generation system to avoid the expensive storage facilities (eg, lakes behind dams, oil storage tanks, etc) necessary in many Earth-based power generation systems. Additionally, an SPS will avoid entirely the polluting consequences of fossil fuel systems, the ecological problems resulting from many renewable or low impact power generation systems (eg, dams).

                                Politically, SPS would create new jobs and opportunities for companies. For nations on the equator, SPS provides an incentive to stabilise and a sustained opportunity to lease land for launch sites.

                                SPS is also applicable on a global scale. Nuclear power especially is something many governments would be reluctant to sell to developing nations. Whether bio-fuels can support the western world, let alone the developed world, is currently a matter of debate. SPS poses no such problems.

                                The industrial capacity needed to construct and maintain such constructions would significantly reduce the cost of other space endeavours. A manned trip to mars (for example) might only cost hundreds of millions, instead of tens of billions.

                                More long-term, the potential amount of power production is enormous. If power stations can be placed outside Earth orbit, the upper limit is vastly higher still. In the extreme, such arrangements are called Dyson spheres.

                                Problems

                                Launch costs

                                Without doubt, the most obvious problem for the SPS concept is the currently immense cost of space launches. Current rates on the Space Shuttle run between $3,000 and $5,000 per pound ($6,600/kg and $11,000/kg) to low Earth orbit, depending on whose numbers are used. Calculations show that launch costs of less than about $180-225 per pound ($400-500/kg) to LEO (Low Earth orbit) seem to be necessary.

                                However, economies of scale for expendable vehicles could give rather large reductions in launch cost for this kind of launched mass. Thousands of rocket launches could very well reduce the costs by ten to twenty times, using standard costing models. This puts the economics of an SPS design into the practicable range.^[39] Reusable vehicles could quite conceivably attack the launch problem as well, but are not a well developed technology.

                                Much of the material launched need not be delivered to its eventual orbit immediately, which raises the possibility that high efficiency (but slower) engines could move SPS material from LEO to GEO at acceptable cost. Examples include ion thrusters or nuclear propulsion. They might even be designed to be reusable.

                                Power beaming from geostationary orbit by microwaves has the difficulty that the required 'optical aperture' sizes are very large. For example, the 1978 NASA SPS study required a 1-km diameter transmitting antenna, and a 10 km diameter receiving rectenna, for a microwave beam at 2.45 GHz. These sizes can be somewhat decreased by using shorter wavelengths, although they have increased atmospheric absorption and even potential beam blockage by rain or water droplets. Because of the thinned array curse, it is not possible to make a narrower beam by combining the beams of several smaller satellites. The large size of the transmitting and receiving antennas means that the minimum practical power level for an SSPS will necessarily be high; small SPS systems will be possible, but uneconomic.

                                To give an idea of the scale of the problem, assuming an (arbitrary, as no space ready design has been adequately tested) solar panel mass of 20 kg per kilowatt (without considering the mass of the supporting structure, antenna, or any significant mass reduction of any focusing mirrors) a 4 GW power station would weigh about 80,000 metric tons, all of which would, in current circumstances, be launched from the Earth. Very lightweight designs could likely achieve 1 kg/kW,^[40], meaning 4,000 metric tons for the solar panels for the same 4 GW capacity station. This would be the equivalent of between 40 and 80 HLLV launches to send the material to low earth orbit, where it would likely be converted into subassembly solar arrays, which then could use high efficiency ion-engine style rockets to (slowly) reach GEO (Geostationary orbit). With an estimated serial launch cost for shuttle-based HLLVs of $500 million to $800 million, total launch costs would range between $20 billion (low cost HLLV, low weight panels) and $320 billion ('expensive' HLLV, heavier panels). Economies of scale on such a large launch program could be as high as 90% (if a learning factor of 30% could be achieved for each doubling of production) over the cost of a single launch today. On addition, there would be the cost of an assembly area in LEO (which could be spread over several power satellites), and probably one or more smaller one(s) in GEO. The costs of these supporting efforts would also contribute to total costs.

                                So how much money could an SPS be expected to make? For every one gigawatt rating, current SPS designs will generate 8.75 terawatt-hours of electricity per year, or 175 TW•h over a twenty year lifetime. With current market prices of $0.22 per kW•h (UK, January 2006) and an SPS's ability to send its energy to places of greatest demand (depending on rectenna siting issues), this would equate to $1.93 billion per year or $38.6 billion over its lifetime. The example 4 GW 'economy' SPS above could therefore generate in excess of $154 billion over its lifetime. Assuming facilities are available, it may turn out to be substantially cheaper to recast on-site steel in GEO, than to launch it from Earth. If true, then the initial launch cost could be spread over multiple SPS lifespans.

                                Extraterrestrial Materials

                                Gerard O'Neill, noting the problem of high launch costs in the early 1970s, proposed building the SPS's in orbit with materials from the Moon.^[41] Launch costs from the Moon are about 100 times lower than from Earth, due to the lower gravity. This 1970s proposal assumed the then-advertised future launch costing of NASA's space shuttle. This approach would require substantial up front capital investment to establish mass drivers on the Moon.

                                Nevertheless, on 30 April 1979, the Final Report ("Lunar Resources Utilization for Space Construction") by General Dynamics' Convair Division, under NASA contract NAS9-15560, concluded that use of lunar resources would be cheaper than terrestrial materials for a system of as few as thirty Solar Power Satellites of 10GW capacity each.^[42]

                                In 1980, when it became obvious NASA's launch cost estimates for the space shuttle were grossly optimistic, O'Neill et al published another route to manufacturing using lunar materials with much lower startup costs ^[43] This 1980s SPS concept relied less on human presence in space and more on partially self-replicating systems on the lunar surface under telepresence control of workers stationed on Earth. Again, this proposal suffers from the current lack of such automated systems, on Earth much less on the Moon.

                                Asteroid mining has also been seriously considered. A NASA design study^[44]evaluated a 10,000 ton mining vehicle (to be assembled in orbit) that would return a 500,000 ton asteroid 'fragment' to geostationary orbit. Only about 3000 tons of the mining ship would be traditional aerospace-grade payload. The rest would be reaction mass for the mass-driver engine; which could be arranged to be the spent rocket stages used to launch the payload. Assuming, likely unrealistically, that 100% of the returned asteroid was useful, and that the asteroid miner itself couldn't be reused, that represents nearly a 95% reduction in launch costs. However, the true merits of such a method would depend on a thorough mineral survey of the candidate asteroids; thus far, we have only estimates of their composition. There has been no such survey. Once built, NASA's CEV should be capable of beginning such a survey, Congressional money and imagination permitting.

                                Space elevators

                                More recently the SPS concept has been suggested as a use for a space elevator. The elevator would make construction of an SPS considerably less expensive, possibly making them competitive with conventional sources. However it appears unlikely that even recent advances in materials science, namely carbon nanotubes, can reduce the cost of construction of the elevator enough in the short term, if an Earth-GSO space elevator is ever practical. A variant to the Earth-GSO elevator concept is the Lunar space elevator, first described by Jerome Pearson^[45] in 1979. Because of the ~20 times shallower (than Earth's) effective potential well for the lunar elevator, this concept would not rely on materials technology beyond the current state of the art, but it would require the establishment of Si mining and solar cell manufacturing facilities on the Moon, similar to the lunar material proposal of G.K. O'Neill, as described in the preceding section.

                                Lofstrom launch loop

                                An alternative to the carbon nanotube based Space Elevator could be a Lofstrom loop. This is a high capacity launch system capable of reaching a geosynchronous transfer orbit at low cost (Lofstrom estimates a large system could go as low as $3/kg to LEO for example.)^[46] Unlike the conventional space elevator it is believed that a launch loop could be built with today's materials.

                                Safety

                                The use of microwave transmission of power has been the most controversial issue in considering any SPS design, but any thought that anything which strays into the beam's path will be incinerated is an extreme misconception. Consider that quite similar microwave relay beams have long been in use by telecommunications companies world wide without such problems.

                                At the earth's surface, a suggested microwave beam would have a maximum intensity, at its center, of 23 mW/cm² (less than 1/4 the solar irradiation constant), and an intensity of less than 1 mW/cm² outside of the rectenna fenceline^[34] (10 mW/cm² is the current United States maximum microwave exposure standard). At present, per OSHA, ^[47], the workplace exposure limit (10 mW/sq. cm.) is expressed in voluntary language and has been ruled unenforceable for Federal OSHA enforcement.

                                The beam's most intense section (more or less, at its center) is far below dangerous levels even for an exposure which is prolonged indefinitely. ^[48] Furthermore, exposure to the center of the beam can easily be controlled on the ground (eg, via fencing), and typical aircraft flying through the beam provide passengers with a protective shell metal (ie, a Faraday Cage), which will intercept the microwaves. Other aircraft (balloons, ultra-light, etc) can avoid exposure by observing airflight control spaces, as is currently done for military and other controlled airspace. Over 95% of the beam energy will fall on the rectenna. The remaining microwave energy will be absorbed and dispersed well within standards currently imposed upon microwave emissions around the world.^[49]

                                The microwave beam intensity at ground level in the center of the beam would be designed and physically built into the system; simply, the transmitter would be too far away and too small to be able to increase the intensity to unsafe "death ray" levels, even in principle.

                                In addition, a design constraint is that the microwave beam must not be so intense as to injure wildlife, particularly birds. Experiments with deliberate microwave irradiation at reasonable levels have failed to show negative effects even over multiple generations. ^[50]

                                Some have suggested locating rectennas offshore ^[51][52], but this presents serious problems, including corrosion, mechanical stresses, biological contamination, ...

                                A commonly proposed approach to ensuring fail-safe beam targeting is to use a retrodirective phased array antenna/rectenna. A "pilot" microwave beam emitted from the center of the rectenna on the ground establishes a phase front at the transmitting antenna. There, circuits in each of the antenna's subarrays compare the pilot beam's phase front with an internal clock phase to control the phase of the outgoing signal. This forces the transmitted beam to be centered precisely on the rectenna and to have a high degree of phase uniformity; if the pilot beam is lost for any reason (if the transmitting antenna is turned away from the rectenna, for example) the phase control value fails and the microwave power beam is automatically defocused.^[53] Such a system would be physically incapable of focusing its power beam anywhere that did not have a pilot beam transmitter.

                                It is important for system efficiency that as much of the microwave radiation as possible be focused on the rectenna. Outside of the rectenna, microwave intensities would rapidly decrease, so nearby towns or other human activity should be completely unaffected.^[53]

                                The long-term effects of beaming power through the ionosphere in the form of microwaves has yet to be studied, but nothing has been suggested which might lead to any significant effect.

                                Defending solar power satellites

                                Solar power satellites would normally be at a high orbit that is difficult to reach, and hence attack.

                                However, it has been suggested that a large enough quantity of granular material placed in a retrograde orbit at the geostationary altitude could theoretically completely destroy these kinds of system and render that orbit useless for generations.

                                Whether this is a realistic attack scenario is arguable, and in any case at the present time there is only a small list of countries with the necessary launch capability to do this, such an attack would probably be considered an act of war by every single nation (except the attacker, who would still lose their own satellites, too) with satellites in geostationary orbit, and an attack with more conventional anti-satellite weapons would probably be considered an act of war by the nation whose satellite was attacked. In any case, the receiving stations on the ground, and conventional power generators (which are unlikely to be completely replaced by solar power satellites), are more easily attacked.

                                Computer security may be a bigger issue than physical defense, since launch capabilities aren't necessary to hack a satellite for purposes of malicious orbital "corrections", extortion (by threatening to destabilize its orbit) or outright "grand theft satellite".

                                SPS's economic feasibility

                                Current energy price landscape

                                Image:Question book-3.svg

                                This section does not cite any references or sources. (January 2008) Please improve this section by adding citations to reliable sources. Unverifiable material may be challenged and removed.

                                In order to be competitive on a purely economic level, an SPS must cost no more than existing supplies.^{[dubious – discuss]} (Such costs must include the costs of cleaning waste from construction, operation and dismantling of the generating systems--including lifestyle and health costs.. Currently(2007) most Earth-based power generation does not include these costs. The cost figures below are undated, but are obsolete as of 2007. This greatly reduces the prices paid for power currently reducing the apparent benefits of SPS'.) This may be difficult, especially if it is deployed for North America, where energy costs have been relatively low. It must cost less to deploy, or operate for a very long period of time, or offer other advantages. Many proponents^{[attribution needed]} have suggested that the lifetime is effectively infinite, but normal maintenance and replacement of less durable components makes this unlikely. Satellites do not, in our now-extensive experience, last forever. (But with regular maintenance there is no reason that a high orbit satellite has to 'die.' Currently (2007) the majority of such satellites--weather and communications, fail due to correctable maintenance issues which we do not correct because we have no repair people on site. Common failures are: running out of station keeping fuel or dead batteries-no longer holding a charge. Neither of these failure modes is much of a problem if service is available. With available refueling and battery replacement, the life of a satellite can be greatly increased. Structural components, which make up the largest percentage of mass, seldom fail. Nearly all of the other components can be modularized for easy replacement/upgrade.)

                                Current prices for electricity on the public grid fluctuate depending on time of day, but typical household delivery costs about 5 cents per kilowatt hour in North America. If the lifetime of an SPS is 20 years and it delivers 5 gigawatts to the grid, the commercial value of that power is 5,000,000,000 ÷ 1000 = 5,000,000 kilowatts^[clarify], which multiplied by $.05 per kW•h gives $250,000 revenue per hour. $250,000 × 24 hours × 365 days × 20 years = $43,800,000,000. By contrast, in the United Kingdom (October 2005) electricity can cost 9–22 cents per kilowatt hour. This would translate to a lifetime output of $77–$193 billion for power delivered to the UK.

                                Comparison with fossil fuels

                                The relatively low price of energy today is entirely dominated by the low cost of carbon based fossil fuels (eg, petroleum, coal and natural gas).

                                There are several problems with existing energy delivery systems. They are subject to (among other problems)

                                • political instability for various reasons in various locations -- so that there are large hidden costs in maintaining military or other presence so as to continue supplies
                                • depletion (some well regarded estimates suggest that oil and gas reserves have been in net decline for some time and that price increases and supply decreases are inevitable),
                                • greenhouse pollution -- all fossil fuel combustion emits enormous quantities of carbon dioxide (CO₂), a greenhouse gas, contributing to global warming and climate change^[54].

                                  Following the Kyoto Treaty, 141 countries introduced the first system of mandatory emissions control via carbon credits. The ultimate direction of such policies is to increase efficiency of fossil fuel use, perhaps to the point of elimination in some countries or even globally. But, the energy requirements of third world or developing countries (e.g. China and India) are increasing steadily. Because of the net increase in demand, energy prices will continue to increase, though how fast and how high are less easily predicted.

                                  Comparison with nuclear power (fission)

                                  Detailed analyses of the problems with nuclear power specifically (nuclear fission) are published elsewhere^[55]. Some are given below, with some comparative comments:

                                  • nuclear proliferation -- not a problem with SPS
                                  • disposal and storage of radioactive waste -- not a problem with SPS
                                  • preventing fissile material from being obtained by terrorists or their sponsors -- not a problem with SPS
                                  • public perception of danger -- problem with both SPS and nuclear power
                                  • consequences of major accident, e.g., Chernobyl -- effectively zero with SPS, save on launch (during construction or for maintenance)
                                  • military and police cost of protecting the public and loss of democratic freedoms -- control of SPS would be a power/influence center, perhaps sufficient to translate into political power. However, this has not yet happened in the developed world with nuclear power.

                                  On balance, SPS avoids nearly all of the problems with current nuclear power schemes, and does not have larger problems in any respect, although public perception of microwave power transfer (ie, in the beams produced by an SPS and received on Earth) dangers could become an issue.

                                  Comparison with nuclear fusion

                                  Nuclear fusion is a process used in thermonuclear bombs (e.g., the H-bomb). Projected nuclear fusion power plants would not be explosive, and will likely be inherently failsafe. However, sustained nuclear fusion generators have only just been demonstrated experimentally, despite well funded research over a period of several decades (since approximately 1952^[56]). There is still no credible estimate of how long it will be before a nuclear fusion reactor could become commercially possible; fusion research continues to receive substantial funding by many nations. For example, the ITER facility currently under construction will cost €10 billion^[57]. There has been much criticism of the value of continued funding of fusion research^[58]. Proponents have successfully argued in favor of ITER funding^[59].

                                  By contrast, SPS does not require any fundamental engineering breakthroughs, has already been extensively reviewed from an engineering feasibility perspective over some decades, and needs only incremental improvements of existing technology^[1] to be deployed. Despite these advantages, SPS has received minimal research funding to date.

                                  Comparison with terrestrial solar power

                                  In the case of the United Kingdom, the country as a whole is further north than even most inhabited parts of Canada, and hence receives little insolation over much of the year, so conventional solar power is not competitive at 2006 per-kilowatt-hour delivered costs. However, per-kilowatt-hour photovoltaic costs have been in exponential decline^[60] for decades, with a 20-fold decrease from 1975 to 2001, so this situation may change.

                                  Let us consider a ground-based solar power system versus an SPS generating an equivalent amount of power.

                                  • Such a system would require a very large solar array built in a well-sunlit area, the Sahara Desert for instance. An SPS requires much less ground area per kilowatt (approx 1/5th). There is no such area in the UK.
                                  • The rectenna on the ground is much larger than the area of the orbiting solar panels. A ground-only solar array would have the advantage, compared to a GEO (Geosynchronous orbit) solar array, of costing considerably less to construct and requiring no significant technological advances. A small version of such a ground based array has recently been completed by General Electric in Portugal.
                                  • The receiving SPS rectenna will be quite simple, cheap, and even transparent, with fewer land use issues than a conventional terrestrial solar array. Crops could be grown beneath the rectenna, so the land needed could be dual-use. By comparison, ground-based solar panels would completely block sunlight thus destroying vegetation and having a considerable effect on local ecology, which in turn would result in increased soil erosion, drainage and runoff problems (increased flood risk) and loss of habitats, though this would be reduced somewhat for desert installations.
                                  • A terrestrial solar station intercepts an absolute maximum of only one third of the solar energy an array of equal size could intercept in space, since no power is generated at night and less light strikes the panels when the Sun is low in the sky or weather interferes. A solar panel in the contiguous United States on average delivers 19 to 56 W/m² ^[61]. By comparison an SPS rectenna would deliver about 23mW/cm² (230 W/m²)^[34] continuously, hence the size of rectenna required per collected watt would be about 8.2% to 24% that of a terrestrial solar panel array with equivalent power output, neglecting weather and night/day cycles. Assuming, of course, current levels of solar cell efficiency.
                                    • Further, if it is assumed that a ground-based solar array must supply baseload power (not true for every projected configuration), some form of energy storage would be required to provide power at night, such as hydrogen generation/storage, compressed air, or pumped storage hydroelectricity. With present technology, energy storage on this scale is prohibitively expensive, and will incur energy losses as well.
                                    • Weather conditions would also interfere with power collection, and will cause wear and tear on solar collectors which will be avoided in Earth orbit; for instance, sandstorms cause devastating damage to human structures via, for example, abrasion of surfaces as well as mechanically large wind forces causing direct physical damage. Terrestrial systems are also more vulnerable to terrorism than an SPS's rectenna since they are more expensive, complex, intolerant of partial damage, and harder to repair/replace. Wear and tear on orbital installations will be of very different character, for quite different reasons, and can be reduced by care in design and fabrication. Long experience with terrestrial installations shows that there is substantial, inescapable maintenance for any economically feasible electrical installation.
                                    • Terrestrial solar panel locations are inherently fixed, but beamed microwave power allows one to adaptively re-route delivered power near to places it is needed (within limits -- rectennas near the SPS's horizon (e.g., at high latitudes) will not be as efficient). A station in the Sahara could provide practical power only to the surrounding area; current demand is relatively low there. That is, at least until long distance superconducting distribution becomes possible, which will make remotely sited Earth surface collection systems more practical, and distribution of generated power equally so, including that from an SPS.
                                    • Remote tropical location of an extensive photovoltaic generator is a somewhat artificial scenario, as photovoltaic costs continue to decline. Deployment of ground-based photovoltaics can be distributed (say to rooftops), but nevertheless, the required acreage (at any credible solar cell efficiency) will remain very large, and maintenance cost and effort will increase substantially compared to a large centralized design. In any case, dispersed installation is not possible for some terrestrial solar collectors.
                                    • Energy payback time for the capital costs of terrestrial PV cells has been typically in the 5-15 year range, depending largely on existing local cost structures. Payback for an orbital installations is likely to be quicker due to the higher total insolation rate, which will, of course be essentially continuous, without interruptions during nighttimes or bad weather. While it is true some of the potential energy available would not be collected (cell inefficienies will assure this in any case), that some would be lost internally at the SPS (no equipment is loss free), and that still more would be lost in transmission back to the Earth, the engineering feasibility studies have established that none of these losses will be large enough to make an SPS project infeasible on those grounds. Losses due to conventional fossil fuel generation are of larger magnitude than in an SPS design, and are more than merely lost efficiency as such losses all contribute to pollution (eg, exhaust gases).

                                    Both SPS and ground-based solar power could be used to produce chemical fuels for transportation and storage, as in the proposed hydrogen economy. Or they could both be used to run an energy storage scheme (such as pumping water uphill at a hydropower generation station).

                                    Many advances in solar cell efficiency (eg, improved construction techniques) that make an SPS more economically feasible might make a ground-based system more economic as well. Also, many SPS designs assume the framework will be built with automated machinery supplied with raw materials, typically aluminium. Such a system could be (more or less easily) adapted for operation on Earth, no launching required. However, Earth-based construction already has access to inexpensive human labor that would not be available in space, so such construction techniques would have to be extremely competitive to be significant on Earth.

                                    Solar Panel Mass Production

                                    Currently the costs of solar panels are too high to use them to produce bulk domestic electricity in most situations. However, mass production of the solar panels necessary to build an SPS system would be likely to reduce those costs sufficiently to change this -- perhaps substantially -- especially as fossil fuel costs have been increasing rapidly. But, any panel design suited to SPS use is likely to be quite different than earth suitable panels, so not all such improvements will have this effect. This may benefit earth based array designs as costs may be lower (see the cost analysis above), but will not be able to take advantage of maximum economies of scale, and so piggyback on production of Earth based panels.

                                    It should be noted, however, that there are also frequent developments in the production of solar panels. Thin film solar panels and so-called "nanosolar" might increase collection efficiency, reduce production costs as well as weight, and therefore reduce the total cost of an SPS installation. In addition, private space corporations could become interested in transporting goods (such as satellites, supplies and parts of commercial space hotels) to LEO (Low Earth orbit), since they already are developing spacecraft to transport space tourists^[62][63]. If they can reduce costs, this will also increase the economic feasibility of an SPS.

                                    Comparison with Other Renewables (wind, tidal, hydro, geothermal)

                                    Other renewable energy sources (e.g., wind energy, tidal energy, hydro-electric, geothermal, ethanol), have the capacity to supply only a tiny fraction of the global energy requirement, now or in the foreseeable future. For most, the limitation is geography as there simply are very few sites in the world where generating systems can be built, and for hydro-electric projects in particular, there are few sites still open. For 2005, in the US, hydro-electric power accounted for 6.5% of electricity generation, and other renewables 2.3%^[64]. The U.S. Govt. Energy Information Administration projects that in 2030 hydro-power will decline to 3.4% and other renewables will increase to 2.9%^[65].

                                    Ocean-based windpower is one possibility (there being large areas for potential installations), but it is strongly affected by two factors; the difficulty of long distance power transmission as many regions of high demand are not near the sea, and be the very large difficulty of coping with corrosion, contamination, and survivability problems faced by all seaborne installations.

                                    Ethanol power production depends on farming in the case of corn or sugar cane origin ethanol, currently the two leading sources. There is insufficient farming capacity for both significant energy production and food production. Corn prices have risen substantially in 2006 and 2007, partly as a result of nascent ethanol production demand. Ethanol from cellulose (eg, agricultural waste or purpose collected non-cultivated plants, eg, switchgrass)) is not practicable as of 2007, though pilot plants are indevelopment. Processing improvements (eg, a breakthrough in enzyme processing) may change this relative disadvantage.

                                    Current work

                                    For the past several years there has been no line item for SPS in either the NASA nor DOE budgets, a minimal level of research has been sustained through small NASA discretionary budget accounts.

                                    NASA's "Fresh Look" study in 2000^[66]

                                    NASDA (Japan's national space agency) has been researching in this area steadily for the last few years. In 2001 plans were announced to perform additional research and prototyping by launching an experimental satellite of capacity between 10 kilowatts and 1 megawatt of power.^[67][68]

                                    The National Space Society (a non-profit NGO) maintains a web page where the latest SPS related references are posted and kept current ^[69].

                                    In May 2007 a workshop was held at MIT in the U.S.A. to review the current state of the market and technology^[70]

                                    In 2007 the U.S. Department of Defense expressed interest in studying the concept^[71].

                                    On 10/10/2007 The National Security Space Office of the US Department of Defense, published an assessment report ^[72]. The report was released at a press conference which simultaneously announced the formation of the Space Solar Alliance for Future Energy which intends to pursue the recommendations of the NSSO-Led Study.

                                    In fiction

                                    Space stations transmitting solar power have appeared in science-fiction works like Isaac Asimov's Reason (1941), that centers around the troubles caused by the robots operating the station.

                                    The anime series Gundam 00 explores the effects and politics space based solar power.

                                    See also

                                    energy Portal

                                    Image:Sustainable development.svg

                                    Sustainable development Portal

                                    • Space solar power
                                    • Energy economics
                                    • Energy storage
                                    • Exergy
                                    • Energy development
                                    • Energy quality
                                    • Microwave power transmission
                                    • Renewable energy
                                    • Spectrolab
                                    • Thinned array curse
                                    • Wireless energy transfer

                                    References

                                    The references in this article would be clearer with a different or consistent style of citation, footnoting, or external linking.

                                    1. ^ ^{a b c}
                                    2. ^ Glaser, Peter E.. "Power from the Sun: Its Future". Science Magazine, 22 November 1968 Vol 162, Issue 3856, Pages 857-861. 
                                    3. ^ Glaser, Peter E.. "METHOD AND APPARATUS FOR CONVERTING SOLAR RADIATION TO ELECTRICAL POWER". United States Patent 3,781,647 December 25, 1973. 
                                    4. ^ Satellite Power System Concept Development and Evaluation Program July 1977 - August 1980. DOE/ET-0034, February 1978. 62 pages
                                    5. ^ Satellite Power System Concept Development and Evaluation Program Reference System Report. DOE/ER-0023, October 1978. 322
                                    6. ^ Satellite Power System (SPS) Resource Requirements (Critical Materials, Energy, and Land). HCP/R-4024-02, October 1978.
                                    7. ^ Satellite Power System (SPS) Financial/Management Scenarios. Prepared by J. Peter Vajk. HCP/R-4024-03, October 1978. 69 pages
                                    8. ^ Satellite Power System (SPS) Financial/Management Scenarios. Prepared by Herbert E. Kierolff. HCP/R-4024-13, October 1978. 66 pages.
                                    9. ^ Satellite Power System (SPS) Public Acceptance. HCP/R-4024-04, October 1978. 85 pages.
                                    10. ^ Satellite Power System (SPS) State and Local Regulations as Applied to Satellite Power System Microwave Receiving Antenna Facilities. HCP/R-4024-05, October 1978. 92 pages.
                                    11. ^ Satellite Power System (SPS) Student Participation. HCP/R-4024-06, October 1978. 97 pages.
                                    12. ^ Potential of Laser for SPS Power Transmission. HCP/R-4024-07, October 1978. 112 pages.
                                    13. ^ Satellite Power System (SPS) International Agreements. Prepared by Carl Q. Christol. HCP-R-4024-08, October 1978. 283 pages.
                                    14. ^ Satellite Power System (SPS) International Agreements. Prepared by Stephen Grove. HCP/R-4024-12, October 1978. 86 pages.
                                    15. ^ Satellite Power System (SPS) Centralization/Decentralization. HCP/R-4024-09, October 1978. 67 pages.
                                    16. ^ Satellite Power System (SPS) Mapping of Exclusion Areas For Rectenna Sites. HCP-R-4024-10, October 1978. 117 pages.
                                    17. ^ Economic and Demographic Issues Related to Deployment of the Satellite Power System (SPS). ANL/EES-TM-23, October 1978. 71 pages.
                                    18. ^ Some Questions and Answers About the Satellite Power System (SPS). DOE/ER-0049/1, January 1980. 47 pages.
                                    19. ^ Satellite Power Systems (SPS) Laser Studies: Meteorological Effects on Laser Beam Propagation and Direct Solar Pumped Lasers for the SPS. NASA Contractor Report 3347, November 1980. 143 pages.
                                    20. ^ Satellite Power System (SPS) Public Outreach Experiment. DOE/ER-10041-T11, December 1980. 67 pages.
                                    21. ^ http://www.nss.org/settlement/ssp/library/1981NASASPS-PowerTransmissionAndReception.pdf "Satellite Power System Concept Development and Evaluation Program: Power Transmission and Reception Technical Summary and Assessment" NASA Reference Publication 1076, July 1981. 281 pages.
                                    22. ^ Satellite Power System Concept Development and Evaluation Program: Space Transportation. NASA Technical Memorandum 58238, November 1981. 260 pages.
                                    23. ^ Solar Power Satellites. Office of Technology Assessment, August 1981. 297 pages.
                                    24. ^ National Space Society - Space Solar Power - History
                                    25. ^ A Fresh Look at Space Solar Power: New Architectures, Concepts, and Technologies. John C. Mankins. International Astronautical Federation IAF-97-R.2.03. 12 pages.
                                    26. ^ Pentagon Considering Study on Space-Based Solar Power Thursday, April 12, 2007, By Jeremy Singer
                                    27. ^ Landis, Geoffrey A.. "Reinventing the Solar Power Satellite". NASA TM-2004-212743, February 2004. 
                                    28. ^ Mason, Lee S.. "A Solar Dynamic Power Option for Space Solar Power". NASA TM-1999-209380, SAE 99-01-2601, July 1999. 
                                    29. ^ Darel Preble interview on The Space Show
                                    30. ^ NASA JPL Web tutorial, Basics of Space Flight, Chapter 11. Typical Onboard Systems, Electrical Power Supply and Distribution Subsystems, http://www2.jpl.nasa.gov/basics/bsf11-3.html
                                    31. ^ ^{a b} What is the Energy Payback for PV?.
                                    32. ^ Net Energy Analysis For Sustainable Energy Production From Silicon Based Solar Cells.
                                    33. ^ Corkish, Richard (1997). "Can Solar Cells Ever Recapture the Energy Invested in their Manufacture?". Solar Progress 18 (2): 16-17. 
                                    34. ^ ^{a b c} Hanley., G.M.. .. "Satellite Concept Power Systems (SPS) Definition Study". NASA CR 3317, Sept 1980. 
                                    35. ^ Spectrolab Press Release40% Breakthrough
                                    36. ^ Komerath, N.M & Boechler, N. (2006), "The Space Power Grid", Valencia, Spain: 57th International Astronautical Federation Congress, IAC-C3.4.06.
                                    37. ^ Figure 3.8.2.2-6. Orbital Options for Solar Power Satellite
                                    38. ^ Solar Power Satellites, Washington, D.C.: Congress of the U.S., Office of Technology Assessment, August, pp. 66, LCCN 81600129
                                    39. ^ Mankins, John C.. "A Fresh Look at Space Solar Power: New Architectures, Concepts and Technologies". IAF-97-R.2.03, 38th International Astronautical Federation. 
                                    40. ^ Case For Space Based Solar Power Development (August 2003). Retrieved on 2006-03-14.
                                    41. ^ O'Neill, Gerard K., "The High Frontier, Human Colonies in Space", ISBN 0-688-03133-1, P.57
                                    42. ^ General Dynamics Convair Division (1979). Lunar Resources Utilization for Space Construction. GDC-ASP79-001. 
                                    43. ^ O'Neill, Gerard K.; Driggers, G.; and O'Leary, B.: New Routes to Manufacturing in Space. Astronautics and Aeronautics, vol. 18, October 1980, pp. 46-51.
                                    44. ^ Space Resources, NASA SP-509, Vol 1.
                                    45. ^ Pearson, Jerome; Eugene Levin, John Oldson and Harry Wykes (2005). Lunar Space Elevators for Cislunar Space Development Phase I Final Technical Report (PDF).
                                    46. ^ Launch Loop slides for the ISDC2002 conference
                                    47. ^ Radiofrequency and Microwave Radiation Standards interpretation of General Industry (29 CFR 1910) 1910 Subpart G, Occupational Health and Environmental Control 1910.97, Non-ionizing radiation.
                                    48. ^ 2081 A Hopeful View of the Human Future, by Gerard K. O'Neill, ISBN 0-671-24257-1, P. 182-183
                                    49. ^ IEEE, 01149129.pdf
                                    50. ^ Environmental Effects - the SPS Microwave Beam
                                    51. ^ "Solar power satellite offshore rectenna study", Final Report Rice Univ., Houston, TX., 11/1980, Abstract: http://adsabs.harvard.edu/abs/1980ruht.reptT.....
                                    52. ^ Freeman, et al., J. W.; .. "Offshore rectenna feasbility". In NASA, Washington The Final Proc. of the Solar Power Satellite Program Rev. p 348-351 (SEE N82-22676 13-44). 
                                    53. ^ ^{a b} IEEE Article No: 602864, Automatic Beam Steered Antenna Receiver - Microwave
                                    54. ^ 2 February 2007, Working Group I of the Intergovernmental Panel on Climate Change (IPCC), Fourth Assessment Report Summary for Policymakers (SPM) http://ipcc-wg1.ucar.edu/wg1/docs/WG1AR4_SPM_PlenaryApproved.pdf.
                                    55. ^ Nuclear power#Concerns about nuclear power
                                    56. ^ Timeline of nuclear fusion
                                    57. ^ ITER
                                    58. ^ ITER#Criticism
                                    59. ^ ITER#Response to criticism
                                    60. ^ Transition to sustainable markets Figure 3 shows approximately 9% decrease per year in costs for PV
                                    61. ^ Wikipedia Solar energy#Energy from the Sun
                                    62. ^ Blue Origin reveals details about vehicle test
                                    63. ^ Virgin Galactic unveils SpaceShipTwo cabin model
                                    64. ^ U.S. Energy Information Administration: Electric Power Generation by Fuel Type (2005)
                                    65. ^ Report #:DOE/EIA-0383(2007),"Annual Energy Outlook 2007 (Early Release)", Released Date: December 2006 http://www.eia.doe.gov/oiaf/aeo/pdf/table1.pdf
                                    66. ^ NASA's "Fresh Look" study in 2000
                                    67. ^ http://www.space.com/businesstechnology/technology/nasda_solar_sats_011029.html
                                    68. ^ Presentation of relevant technical background with diagrams: http://www.spacefuture.com/archive/conceptual_study_of_a_solar_power_satellite_sps_2000.shtml
                                    69. ^ Space Solar Power Library http://www.nss.org/settlement/ssp/library/index.htm
                                    70. ^ Terrestrial Energy Generation Based on Space Solar Power: A Feasible Concept or Fantasy? Date: May 14-16, 2007; Location: MIT, Cambridge MA
                                    71. ^ Pentagon Considering Study on Space-Based Solar Power Thursday, April 12, 2007, By Jeremy Singer
                                    72. ^ Space‐Based Solar Power As an Opportunity for Strategic Security - Phase 0 Architecture Feasibility Study - Report to the Director, National Security Space Office - Interim Assessment, Release 0.1, 10 October 2007

                                    
                                    

                                    • Solar Power Satellites (Hardback) Glaser, P. E., Frank P. Davidson and Katinka Csigi, 654 pgs, 1998, John Wiley & Sons ISBN 0-471-96817-X
                                    • Rodenbeck, Christopher T. and Chang, Kai, "A Limitation on the Small-Scale Demonstration of Retrodirective Microwave Power Transmission from the Solar Power Satellite", IEEE Antennas and Propagation Magazine, August 2005, pp. 67–72.
                                    • The above sites Solar Power Satellites Office of Technology Assessment, US Congress, OTA-E-144, August 1981.

                                    External links

                                    • The World Needs Energy from Space Space-based solar technology is the key to the world's energy and environmental future, writes Peter E. Glaser, a pioneer of the technology.
                                    • Reinventing the Solar Power Satellite", NASA 2004-212743, report by Geoffrey A. Landis of NASA Glenn Research Center
                                    • Japan's plans for a Solar Power Station in Space - the Japanese government hopes to assemble a space-based solar array by 2040.
                                    • Power From Space Blog about using solar power satellites to reduce reliance on burning hydrocarbons.
                                    • Whatever happened to solar power satellites? An article that covers the hurdles in the way of deploying a solar power satellite.
                                    • Solar Power Satellite from Lunar and Asteroidal Materials Provides an overview of the technological and political developments needed to construct and utilize a multi-gigawatt power satellite. Also provides some perspective on the cost savings achieved by using extraterrestrial materials in the construction of the satellite.
                                    • A renaissance for space solar power? by Jeff Foust, Monday, August 13, 2007 Reports on renewed institutional interest in SSP, and a lack of such interest in past decades.fr:Centrale solaire orbitale

                                    it:Centrale solare orbitale ja:宇宙太陽光発電 pl:Elektrownia orbitalna pt:Satélite de energia solar